884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

鄒若夢，董軍，金曉蘭

（南京工業大學新型鋼結構研究所， 南京 210009）

 

［摘要］焊縫連接是不銹鋼結構中主要的連接方式之一。對常用的奧氏體304不銹鋼，進行了不銹鋼結構對接焊縫連接受力性能試驗，共10組120個試件，分別考慮焊條電弧焊（SMAW）、鎢極氬弧焊（TIG）和熔化極氬弧焊（MIG）3種焊接工藝和5種板厚。得到了對接焊縫的極限荷載和極限變形，以及焊縫和熱影響區強度與母材強度的關系。將試驗結果與國外不銹鋼結構設計規范以及我國鋼結構設計規范進行了對比，提出了適用于我國不銹鋼結構對接焊縫連接的設計建議。

［關鍵詞］不銹鋼；對接焊縫；試驗研究；設計建議

中圖分類號：TU392.6      文獻標識碼：A      文章編號：1002-848X(2013)09-0083-05

 

Experiments and design suggestions for stainless steel weld connections

Zou Ruomeng, Dong Jun, Jin Xiaolan

 (Institute of Steel Structures, Nanjing University of Technology, Nanjing 210009, China)

 

Abstract: Weld connection is one of the main connection types for stainless steel structures. One hundred and twenty specimens of butt weld connections made of austenitic stainless steel 304 were tested with different weld procedures such as SMAW, TIG and MIG and five kinds of plate thicknesses. The results obtained the ultimate load and deformation of butt weld connection, and the relationship between the strength of weld metal, metal in heat affected zone and base metal. Comparing the test results, design codes for international stainless steel structures and design code for Chinese steel structures, the weld connection design suggestions of stainless steel structures which apply to China were put forward.

Keywords: stainless steel; butt weld; experimental investigation; design suggestion

*江蘇省“六大人才高峰”項目(2010-JZ-012)。

通訊作者：董軍,博士,教授,Email: dongjun64888@163.com。

 

參考文獻

［1］鄒若夢, 董軍, 章金旭. 美歐不銹鋼結構連接設計規范比較［J］. 工業建筑， 2012, 42(5): 63-66.

［2］SEI/ASCE 8-02 Specification for the design of coldformed stainless steel structural members［S］. 2002.

［3］EN 1993-1-4 Eurocode 3: Design of steel structures part1-4: general rules-supplementary rules for stainless steels ［S］.2006.

［4］Design manual for structural stainless steel ［S］. 3rd ed. Euro Inox and The Steel Construction Institute, 2007.

［5］AS/NZS 4673:2001 Coldformed stainless steel structures［S］. Sydney: Standards Australia, 2001.

［6］GB/T 983—1995 不銹鋼焊條［S］. 北京:中國建筑工業出版社, 1995.

［7］YB/T 5092—2005 焊接用不銹鋼絲［S］. 北京:中國建筑工業出版社, 2005.

［8］鄒若夢. 不銹鋼連接承載力性能試驗研究［D］. 南京: 南京工業大學, 2012.

［9］鄭寶鋒, 舒贛平, 沈曉明. 不銹鋼材料常溫力學性能試驗研究［J］. 鋼結構，2011, 26(5): 1-6.

［10］GB 50017—2003 鋼結構設計規范［S］. 北京:中國計劃出版社, 2003.