抗浮錨桿的布置方式及防水板的設計探討
王家林
- 摘 要
-
王家林(北京中弘控股股份有限公司,北京100024)[摘要] 當?shù)叵滤惠^高時,一般采用抗浮錨桿的方式解決抗浮問題。抗浮錨桿施工方便,節省造價,同時因?yàn)榭垢″^桿直徑一般150mm左右,對基礎豎向抗壓承載力影響較小,因此被廣泛用于地下室工程抗浮設計方案中。本文分析抗浮錨桿的布置方式,分析總結了對防水板設計的影響,并對工程應用提出了具體的建議。[關鍵詞] 抗浮錨桿;防水板;彈簧剛度系數;非線性;基床系數中圖分類號:TU46 文獻標識碼:A 文章編號:1002-848X(2012) S2-0517-03Layout of anti-floating anchor and the design of waterproof boardWang Jialin( ZhongHong Holdings Co., Ltd., Beijing 100024, China)Abstract: The anti-floating anchor is commonly used to solve the problem of the ground water lever is lugher. Construction of anti-floating anchor is convenient, save cost, and anti-floating anchor diameter is generally about 150mm, no adverse effect on basis of vertical compression bearing capacity. Therefore, it been widely used in the anti-floating design of basement. The paper analyzes the layout of anti-floating anchor, analyzes and summarizes the impact of waterproof board, made specific recommendation for engineering application.Keywords: anti-floating anchor; waterproof board; spring stiffness coefficient; nonlinear; coefficient of subgrade reaction
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!