上部結構嵌固部位的處理
吳漢福1,戴國瑩2,袁文章1
- 摘 要
-
吳漢福1,戴國瑩2,袁文章1（1 中國中元國際工程公司，北京 100089； 2 中國建筑科學研究院，北京 100013）［摘要］隨著地下室和地基基礎形式的多樣化，上部結構嵌固部位的選取顯得復雜而重要。只有綜合分析各種結構不同的情況，才能有針對性地正確選取上部結構的嵌固部位，采取正確的計算方法和構造措施。針對不同的情況，討論了結構設有地下室時，上部結構嵌固部位的選取和處理方法；同時也對基礎埋置深度不同時，無地下室結構及山地建筑的上部結構嵌固部位進行了分析，給出了不同情況的計算方法和構造措施。［關鍵詞］地下室；上部結構；嵌固部位中圖分類號：TU375 文獻標識碼：A 文章編號：1002-848X(2013)03-0122-03Treatment of build-in parts of superstructuresWu Hanfu1, Dai Guoying2, Yuan Wenzhang1(1 China IPPR International Engineering Corporation, Beijing 100089, China; 2 China Academy of Building Research, Beijing 100013, China)Abstract: Due to the type diversification of the basement and foundation, the determination of the build-in parts of superstructures is complicated and important. Different situations of various structures should be analyzed comprehensively, thus the build-in parts of superstructures can be determined correctly, and reasonable calculation methods and construction measures can be adopted accordingly. The selection and treatment methods of the build-in parts of superstructures for structures without basement were discussed in various situations. The build-in parts of superstructures with different embedded depths were analyzed in cases of the buildings without basement and the mountainous region buildings with different embeded depths of basement. Calculation methods and construction measures for the different situations were presented accordingly.Keywords: basement; superstructure; building parts作者簡介：吳漢福，學士，教授級高級工程師，一級注冊結構工程師，Email：wuhanfu@ippr.net參考文獻［1］GB 50011—2010 建筑抗震設計規范［S］.北京：中國建筑工業出版社，2010.［2］JGJ 3—2010 高層建筑混凝土結構技術規程［S］.北京：中國建筑工業出版社，2011.
