- 摘 要
-
李宗凱
(北京工業大學，北京100022)[摘要] 針對平面桁架結構和空間鋼網架結構的傳感器優化布置方案進行了概述和討論，應用動力模態應變能理論模擬優化一平面鋼桁架和一實際空間鋼桁架結構的傳感器布置，對算例進行了分析計算。應用Matlab語言開發編程，從而快速有效的實現傳感器的優化布置。并對計算結果加以分析，得出一些有意義的結論。
[關鍵詞] 傳感器； 優化布置； 鋼桁架； 模態應變能The method of the optimum disposal of sensors on the basis of structural dynamics in mode strain energy and instance
Li Zongkai
(Beijing University of Technology, Beijing 100022, China)Abstract: The article provides the specific discussion and summary of the optimum disposal of sensors aiming at the plane truss and space steel grid. It takes the advantage of theory in mode strain energy to realize the accurate disposal of sensors in an artificial plane truss and a space steel truss of real project. Also, we exploit beneficial programs by Matlab so as to address the similar problems fast and efficiently Finally, we have a close research with the outcome, from which we are able to deduce some instructive conclusions.
Keywords: sensors; optimumdisposalofsensors; steeltruss, Modestrainenergy
- 下載地址
-
