- 摘 要
-
劉南鄉1，鄭毅敏2
(1 同濟大學建筑工程系，上海200092; 2 同濟大學建筑設計研究，上海200092)[摘要] 確定地下室頂板能否作為上部結構的嵌固端時，必須要考慮地下室與上部結構的側向剛度比不小于2的要求；但是現行規范中沒有規定計算地下室側向剛度的有效范圍。本文通過建立高層框架結構的簡化模型，用SATWE分析高層建筑結構的動力、內力與變形特性，證實并探討影響結構特性的地下室有效范圍。
[關鍵詞] 高層建筑；嵌固；側向剛度；剛度比Study on the Effective Scope of Basement That Can Influence Structural Properties
Liu Nanxiang1, Zheng Yimin2
(1 Department of Building Engineering, Tongji University, Shanghai 200092,China; 2 Architectural Design & Research Institute of Tongji University, Shanghai 200092, China)Abstract: To ensure whether the superstructure can be fixed on the top slab of the basement, the ratio between the lateral rigidity of the basement and that of the upside adjacent floor structure is required to be no less than 2. However, the effective scope of the base to calculate lateral rigidity hasn't been confined in the current norm yet. Since then, according to the study of dynamic characters, inner force and deformation of a simplified high-rise frame structure model with the help of the software SATWE, the effective scope of the base that can influence the global structural properties is verified and analyzed in this paper.
Keywords: high-rise building; build-in; lateral rigidity; ratio of rigidity
