配筋混凝土砌塊砌體剪力墻截面延性數值分析方法研究*
李明，陳積光，童小龍
- 摘 要
-
李明，陳積光，童小龍（湖南理工學院土木建筑工程學院，岳陽 414006）[摘要] 系統地研究了配筋混凝土砌塊砌體剪力墻的截面延性系數分析、截面屈服彎矩和極限彎矩計算、截面屈服曲率估算以及截面彎矩曲率關系曲線建立的數值分析法，討論了剪力墻軸壓比、翼緣寬度、材料強度、配筋率和配箍特征值等因素對剪力墻截面延性的影響，提出了截面屈服曲率的估算公式。最后結合配筋砌塊砌體剪力墻低周反復荷載試驗，驗證了配筋混凝土砌塊砌體剪力墻截面延性數值分析法的可靠性。[關鍵詞] 配筋混凝土砌塊砌體；剪力墻；截面延性；數值分析中圖分類號：TU375-62文獻標識碼：A文章編號：1002-848X(2012)12-0120-03Study on numerical analysis method of section ductility for reinforced concrete block masonry shear wallsLi Ming, Chen Jiguang, Tong Xiaolong(Department of Civil Engineering, Hunan Institute of Science and Technology, Yueyang 414006, China)Abstract: The numerical analysis method for reinforced concrete block masonry shear walls had been studied systematically, which is used to analyze the section ductility coefficient, to calculate the section yielding and ultimate moment, to estimate the section yield curvature, to analyze the moment-curvature relationship curves. The effect of axial compression ratio, flange width of shear wall, strength of materials, reinforcement ratio and reinforcement characteristic value on shear wall section ductility was discussed, and the estimating formulas of yield curvature of section were presented. The low-cyclic reversed loading test results of reinforced concrete brick masonry shear walls indicate that the numerical analysis method is reliable and effective.Keywords: reinforced concrete block masonry; shear wall; section ductility; numerical analysis*湖南省教育廳科研項目（12C0713）作者簡介：李明, 碩士, 講師, Email:hnistli@163.com參考文獻［1］李明, 汪夢甫. 配筋混凝土砌塊砌體剪力墻位移延性的數值分析［J］. 四川建筑科學研究, 2009, 35(4):68-70.［2］PRIESTLEY M J N，KOWALSKY M J. Aspects of drift and ductility capacity of rectangular cantilever structural walls［J］.Bulletin of the New Zealand National Society for Earthquake Engineering, 1998, 31(2):73-85.［3］User-s guide to NZS 4230: Design of reinforced concrete masonry structures［S］.Wellington: New Zealand Concrete Masonry Association Inc, 2004.［4］唐岱新, 龔紹熙, 周炳章. 砌體結構設計規范理解與應用［M］. 北京:中國建材工業出版社,2002.［5］GB 50003-2001 砌體結構設計規范［S］. 北京:中國建筑工業出版社, 2001.
