- 摘 要
-
蔣友寶1， 楊偉軍1， 羅國軍2， 楊 毅1
（1 長沙理工大學土木與建筑學院，長沙410004；2 雅邦建材科技開發有限公司，長沙410015）[摘要] 介紹了一種由石膏板和無機龍骨速拼而成的組合墻體。通過一系列試驗，研究了石膏板斷裂荷載隨含水率變化的關系及有筋和無筋兩種無機龍骨受彎破壞的特點。最后對這種新的組合墻體和輕鋼龍骨組合墻體分別進行堆載試驗，結果表明該無機龍骨石膏板墻體具有優良的受彎性能，可以用來取代輕鋼龍骨組合墻體。
[關鍵詞] 石膏板；龍骨；墻體；受彎性能
中圖分類號：TU526 文獻標識碼：A 文章編號：1002-848X(2011) S2-0504-04Experimental research on bending performance for a rapidwall fabricated with plasterboard
Jiang Youbao1, Yang Weijun1, Luo Guojun2, Yang Yi1
(1 College of Civil Engineering and Architecture, Changsha University of Science and Technology, Changsha 410004, China; 2 Yabang Building Materials Science and Technology Development Co., Ltd., Changsha 410015, China)Abstract: A new rapidwall was introduced, which is fabricated with plasterboard and inorganic skeleton. With a series of experiments, the fracture load varying with different water content for the plasterboard was studied, and the characteristics of the bending failure for the organic and inorganic skeleton were analyzed. Finally, loading tests were performed on this new rapidwall and composite wall with steel furring. The results show that the new rapidwall holds the excellent bending performance, and can substitute the composite wall with steel furring.
Keywords: plasterboard; skeleton; wall; bending performance
