884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

杜新喜，劉茂青，程曉燕

（武漢大學土木建筑工程學院，武漢430072）

 

［摘要］按照準確的螺栓球幾何控制條件，推導了螺栓球直徑控制公式，從而對規程公式進行修正，并完善了桿件夾角較小時錐頭（封板）和桿件控制公式。用規程公式和本文公式（考慮螺栓球配件制作各項誤差）對7種節點進行設計，對比發現：當桿件夾角較為合理時，本文公式螺栓球節點用鋼量明顯低于規程公式用鋼量；當桿件夾角較小時，按照錐頭（封板）和桿件控制公式，本文公式能夠增大螺栓球直徑，從而避免桿件相碰。

［關鍵詞］螺栓球節點；空間網格結構；錐頭；封板；節點相碰

中圖分類號：TU393-3文獻標識碼：A文章編號：1002-848X(2012)09-0114-03

 

Du Xinxi, Liu Maoqing, Cheng Xiaoyan

(Civil Engineering Department, Wuhan University, Wuhan 430072, China)

 

Abstract: Diameter selection formulas in accordance with precise geometrical controlling conditions were deduced, which revises the specification formulas and perfects the controlling formulas for cone-shaped connectors(or end plates) and steel pipe with small included angle. Seven space truss structure nodes were designed by specification formula and paper formula respectively. The contrast results show that the steel consumption of paper formulas (which take fabrication errors into account) is less than that of specification formulas when the included angle is reasonable. When the included angle is small, according to the controlling formulas for cone-shaped connector (or end plate) and steel pipe, the diameter of bolted spherical joints calculated with paper formulas could be increased which could avoid collision between pipes.

Keywords: bolted spherical joint; space lattice structure; cone-shaped connector; end plate; node collision

*建設部鋼結構CAD軟件開發項目（03-5-9）。

作者簡介：杜新喜，教授，博士生導師，Email: duxinxi@163.com。

 

［1］JGJ 7─2010空間網格結構技術規程［S］.北京：中國建筑工業出版社，2010.

［2］沈祖炎, 陳揚驥. 網架與網殼［M］.上海：同濟大學出版社，1996.

［3］劉錫良. 平板網架設計與施工圖集［M］.天津：天津大學出版社，2000.

［4］GB/T 16939─1997 鋼網架螺栓球節點用高強度螺栓［S］.北京：中國計劃出版社，2004.

［5］JG/T 10─2009 鋼網架螺栓球節點［S］.北京：中國標準出版社，2010.

［6］DB 32/952─2006 鋼網架（殼）螺栓球節點錐頭技術規程［S］.南京：江蘇省質量技術監督局，2007.