- 摘 要
-
王 彬， 趙憲忠
（同濟大學建筑工程系，上海 200092）[摘要] 基于ABAQUS工作平臺，建立了已完成的8個平面K形圓鋼管搭接節點滯回試驗的數值分析模型。將軸向往復荷載下試驗節點的數值計算結果與試驗結果進行對比分析，討論其破壞模式、滯回曲線、最大承載力的對比結果。結合影響節點性能的主要幾何參數，建立71個數值分析模型進行參數分析，通過多元參數回歸方法擬合得出基于Menegotto-Pinto方程的節點貫通腹桿軸力一變形骨架曲線，并提出了對應的簡化滯回關系。分析結果表明：恢復力模型與數值分析結果吻合良好，可供工程設計與數值簡化計算參考。
[關鍵詞] 圓鋼管相貫節點；數值分析；參數分析；恢復力模型
中圖分類號：TU391 文獻標識碼：A 文章編號：1002-848X(2012) Sl-0716-05Research on hysteretic model of overlapped CHS K-joints
Wang Bin, Zhao Xianzhong
( Department of Building Engineering, Tongji University, Shanghai 200092, China)Abstract: Based on nonlinear finite element method,a numerical model was constructed to investigate the hysteric behavior of 8 tested overlapped CHS K-joints under axially cyclic loading. The accuracy of the numerical model was verified by comparing the numerical analyses with mentioned joints focusing on failure mode, hysteretic curve and ultimate capacity. The verified finite element model was conducted on 71 0verlapped CHS K-joints of various geometrical parameters. According to the result of parameter study, the parametric equation of the through brace's skeleton curve was established and so was the hysteretic relationship. Results using the proposed hysteretic model agree well with the finite element analysis results, and the hysteretic model can be used into the initial design of the practical engineering and the numerical analysis.
Keywords: overlapped CHS K-joints; numerical analysis; parametric analysis; hysteretic mode
