- 摘 要
-
鮑育明1， 范本輝2， 趙艷秋1， 蔣銀華1
（1 南京軍區建筑設計院，南京 210029；2 南京軍區聯勤部司令部直屬工作處，南京 210016）[摘要] 結合一個在建工程加層加固的設計實例，論述了加層加固結構設計的主要步驟。采用SATWE計算軟件對加層后的整體結構進行了抗震驗算。根據加層后結構的層間位移、最大頂部位移、柱軸壓比、柱配筋等參數，對照原結構設計給出了框架梁、框架柱的加固設計方法和施工工藝。根據樁基的靜載試驗數據及建筑沉降觀測數據，采用樁-土共同作用理論，驗算了地基基礎承載力。
[關鍵詞] 結構加層；外粘型鋼加固法；復合截面加固法；樁-土共同作用
中圖分類號：TU375.4 文獻標識碼：A 文章編號：1002-848X( 2012) Sl-0586-03Structure strengthening design for adding floor of building
Bao Yuming1, Fan Benhui2, Zhao Yanqiu1, Jiang Yinhua1
(1 Nanjing Military Area Architecture Design Institute, Nanjing 210029, China; 2 Nanjing Military Area Logistics Department Direct Office, Nanjing 210016, China)Abstract: Combining with design example of structure strengthening for adding floor in a project under construction, the main steps of structure strengthening design for adding floor were discussed in this paper. Using SATWE calculation software, the anti-seisnuc performance of whole structure of adding floor building was calculated. According to the maximum displacement, floor displacement, column axial compression ratio, column reinforcement parameters of adding floor building, the reinforcement of frame beam and column design method and construction technology were given by comparing with the original structure design.According to the pile static load test data and building subsidence observation data, the bearing capacity of foundation was checked by using the theory ofinteraction between pile and soil.
Keywords: adding floor of structure; structure member strengthening with externally bonded steel frame; structure member strengthening with R.C;interaction between pile and soil
