- 摘 要
-
張永剛
（中冶京誠工程技術有限公司，北京 100053）[摘要] 對剪力墻結構工程施工圖設計文件審查過程中經常遇到的一些問題歸納為五個方面：剪力墻結構的規則性和地震作用計算；結構計算的合理性；剪力墻截面設計的一些構造要求；結構嵌固端和底部加強部位；底部加強部位邊緣構件的設置要求等。并分別提出了處理方法和需要注意的地方。此外著重對結構平面凹凸不規則、結構扭轉不規則、計算參數的合理取用、連梁超筋處理等問題作了較為詳細的闡述。設計人員可從中總結經驗以提高設計質量，保證結構的安全合理性。
[關鍵詞] 施工圖審查；剪力墻結構；連梁超筋；底部加強部位；邊緣構件
中圖分類號：TU375 文獻標識碼：A 文章編號：1002-848X(2012) Sl-0412-03Discussions on common problems about shop drawing checking of shear wall structure
Zhang Yonggang
( Capital Engineering ＆Research Incorporation Limited, Beijing 100053, China)Abstract: Some common problems often met in the shop drawing checking of shear wall structure are analyzed, wluch are divided into five aspects: the rules of the shear wall structure and seismic calculation; rationality of structural calculations; construction requirements of shear wall cross-sectio design; partial fixing and reinforced part at the bottom; requirements for edge member at reinforced part at the bottom. The treatment methods are put forward. In addition, plane concave-convex irregularity, torsion irregularity, reasonable calculation parameters, treatment for over-reinforced coupling beam, and so on, are elaborated. Some experiences can be summarized to improve the design quality and guarantee the structure safety.
Keywords: shop drawing checking; shear wall structure; over-reinforced coupling beam; reinforced part at the bottom; edge member
