- 摘 要
-
鄒 宇 石永久 王元清 李少甫
(清華大學建筑玻璃與金屬結構研究所 北京 100084)[提要] 研究了點式支承玻璃結構中帶金屬緊固件和墊層材料的圓形玻璃板的承載力問題,分析了塑料墊層的彈性模量、厚度和緊固件的內徑對有墊層的帶單緊固件圓形玻璃板有限元模型的應力狀態和承載力的影響。研究結果表明:采用較大彈性模量的墊層,有利于提高玻璃板的承載力;墊層厚度對玻璃板的承載力影響很小,考慮到經濟性和制造工藝要求,墊層最小厚度可取為Imm;采用內徑較小的金屬緊固件,對提高玻璃板的承載力是不利的。如果確實需要采用內徑較小的緊固件,則應選取彈性模量較大、厚度較小的墊層。
[關鍵詞] 點式支承玻璃結構 金屬連接件 緊固件 塑料墊層 承載性能The paper deals with the bearing capacity of circular glass panels with metal fasteners and plastic layers in point-supporting glass structures. Influences of the elastic modulus and thickness of plastic layers and the inner diameter of the fastener on the stress state and capacity of circular glass-panel models with single metal fastener have been investigated. Results show that: adopting layers with large elastic modulus is helpful to enhance the loading capacity of glass boards; the thickness of layers has little effect on the loading capacity of glass boards, minimum thickness of layers can be Imm; adopting metal fasteners with small internal diameters is not helpful to enhance the loading capacity of glass boards. But thin layers with large modulus can be used when small-diameter fasteners are adopted.
Keywords: polnt-supporting glass structure; metal connector; fastener; plastic layer; loading property
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!