框支墻梁的試驗研究、有限元分析和承載力計算*
龔紹熙1 李 翔1 吳承霞2 陳力奮3
- 摘 要
-
龔紹熙1 李 翔1 吳承霞2 陳力奮3（1 同濟大學土木工程學院 上海 200092； 2 河南省建筑工程學校 鄭州 450007； 3 復旦大學力學與工程科學系 上海 200433）
[提要] 通過框支墻梁在豎向荷載作用下的試驗內力分析，認定有限元分析結果總體上與試驗符合。分別進行單跨和2～4跨框支墻梁的有限元分析，摸清其內力和應力分布，給出托梁和框支柱內力近似計算公式。在試驗研究和有限元分析的基礎上提出框支墻梁承載力計算建議，給出計算實例并與其他設計方法進行比較。
[關鍵詞] 框支墻梁 試驗研究 有限元分析 承載力計算
That the results of finite element analyses tally with the test results is supposed based upon the test inner force analyses for the wall-beams supported on frame under the vertical loading. The finite element analyses of single span and 2～4 span wall-beams supported on frame are carried out respectively, and the formulas for inner forces of bressumer and frame column are given. The suggestions for calculation of bearing capacity of the wall-beams supported on frame are presented based upon the experimental research and the finite element analysis. The calculated example and comparison between this method and others are given.
Keywords: wall-beams supported on frame; experimental research; finite element; calculation; bearing capacity
- 下載地址
-
