PHC管樁樁身抗剪承載力試驗與計算方法研究*
吳江斌,樓志軍,宋青君
- 摘 要
-
吳江斌,樓志軍,宋青君(華東建筑設計研究院有限公司,上海 200002)[摘要]開展了PHC-AB 400(80)型管樁在無軸壓及1 300kN軸壓作用下的抗剪承載力試驗,分別得到了管樁在純剪與壓剪作用下的極限抗剪承載力,同時對管樁的剪切破壞形態有了更清晰的認識。針對管樁螺旋箍筋的受力特點,推導了箍筋的抗剪承載力計算表達式,得到了綜合反映預應力管樁混凝土環形截面和螺旋箍筋對抗剪承載力貢獻的管樁抗剪承載力計算公式?;谠囼?yàn)得到的極限承載力對多種計算公式進行了比較,驗證了本文計算公式的合理性,該公式可用于預應力管樁、非預應力管樁的純剪和壓剪承載力計算。[關鍵詞]PHC管樁;抗剪承載力;計算方法中圖分類號:TU473-1文獻標識碼:A文章編號:1002-848X(2012)05-0164-04Test and calculation method research on the shear capacity of PHC pipe pilesWu Jiangbin, Lou Zhijun, Song Qingjun(East China Architectural Design & Research Institute Co., Ltd., Shanghai 200002, China)Abstract: Test on the shear capacity of PHC pipe piles under axial compressive 0, 1 300kN was carried out. The ultimate shear capacity of PHC-AB 400(80) pipe pile was obtained while the piles were in the state of pure shear and pressure shear, and the shear failure forms of piles were understood more clearly. The formula of shear capacity of spiral reinforcement was proposed, and a new method to calculate the shear capacity of PHC pipe piles was put forward,which reflected both the ring section of concrete and the mechanical characteristics of spiral reinforcement. Compared with other methods, the new method can fit better to the test values, which proves that the new method is reasonable. The new formula can be used to calculate the shear capacity of PHC pipe piles and non-prestressed pile, when the piles are in the state of pure shear or pressure shear.Keywords: PHC pipe pile; shear capacity; calculation method參考文獻[1]呂志濤,石平府,周燕勤,等.圓形、環形截面鋼筋混凝土構件抗剪承載力的試驗研究[J].建筑結構學報,1995,16(3):13-20.[2]宋寅. 預應力混凝土管樁填芯混凝土抗剪試驗[D]. 合肥: 合肥工業大學,2006.[3]張忠苗, 劉俊偉, 鄒健,等. 加強型預應力混凝土管樁抗彎剪性能試驗研究[J]. 浙江大學學報:工學版, 2011, 45(6): 1074-1080.[4]柳炳康, 李建宏, 張星宇,等. 預應力填芯管樁抗彎性能與延性特征的試驗[J]. 工業建筑, 2007, 37(3): 46-50.[5]劉永超, 鄭剛, 康谷貽,等. 預應力混凝土管樁斜截面抗剪承載力試驗研究[J].建筑結構, 2011, 41(5):93-97.[6]劉俊偉,張忠苗,于秀霞,等. 預應力混凝土管樁抗彎及抗剪性能試驗研究[J].建筑技術, 2010, 41(12):1101-1104.[7]10SG409預應力混凝土管樁圖集[S]. 北京:中國建筑標準設計研究院,2010.[8]DBJT 08.92—2000先張法預應力混凝土管樁圖集[S].上海:上海市建設和管理委員會,2000.[9]GB 50010—2010混凝土結構設計規范[S]. 北京:中國建筑工業出版社, 2010.
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!