884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

 鄒金林    （奧雅納工程顧問香港有限公司上海代表處 200021）

[提要]  在闡述結構上的荷載作用和裂縫產生原因的基礎上，結合一工程事故，分析了溫度、收縮和徐變等變形荷載作用產生裂縫的機理。根據工程實際計算了變形荷載作用下的內力，其結果與工程事故的情一致。最后提出工程實踐中進行裂縫控制的結論和建議。
[關鍵詞]  變形荷載  裂縫控制  伸縮縫  溫度應力  收縮應力  徐變作用  應力松馳

On the basis of theoretical analysis about generation and development of crack on floorboard, its generating mechanism under the action of racking load, such as temperature, shrinkage and creep, is interpreted with a fault case. The internal forces caused by the action of racking load, which is calculated, are the same as the results of the actual measurement. In the end, some conclusions and propositions about the control and design of crack are presented.
Keywords: racking load; crack control; expansion joint; temperature stress; shrinkage stress; creep; stress relaxation