- 摘 要
-
(1 同濟大學建筑工程系，上海 200092；2 中國民航機場建設集團公司，北京 110101；3 華東建筑設計研究院有限公司，上海 200002)
［摘要］采用ANSYS有限元軟件對四邊簡支夾層玻璃受彎進行數值分析，并與受彎承載力試驗結果比較，研究夾層玻璃的受力特點，進而得出準確的夾層玻璃的力學計算模型。在夾層玻璃承載力試驗和大量數值模擬的基礎上，與國內外玻璃幕墻規程進行比較，歸納總結出PVB膠片對夾層玻璃承載力的影響程度，對現行《玻璃幕墻工程技術規范》（JGJ 102—2003）中關于夾層玻璃在風荷載等短期荷載作用下的撓度公式進行修正并給出修正系數。
［關鍵詞］夾層玻璃；承載力；試驗研究；數值模擬
中圖分類號：TU382文獻標識碼：A文章編號：1002-848X(2012)02-0173-03
Theoretical and experimental study on load bearing capacity of laminated glass simply supported on four sides
Wang Xun1, Zhang Qilin1, Tao Zhixiong1, Chen Jun2, Chen Jun3(1 Department of Building Engineering, Tongji University, Shanghai 200092, China；2 China Airport Construction Group Corporation of CAAC，Beijing 110101, China；3 East China Architectural Design & Research Institute Co., Ltd., Shanghai 200002, China)
Abstract:The laminated glass simply supported on four sides subjected to bending was analyzed using the finite element software ANSYS, and the numerical analysis was compared with the experimental results. Based on the theoretical and experimental results, accurate calculation model was established. On the basis of many finite element analysis of laminated glass and load bearing capacity tests, the formula for calculating maximum displacement of four-sides supported laminated glass in Technical code for glass curtain wall engineering (JGJ 102—2003) was revised and the corresponding revised coefficient was given.
Keywords:laminated glass; load bearing capacity; experimental research; numerical simulation
*國家自然科學基金資助項目（50978195）。
作者簡介：王勛，碩士研究生，Email：wangxun_wx@sina.com。
參考文獻
［1］張其林.玻璃幕墻結構［M］.濟南：山東科學技術出版社，2006.
［2］張其林.玻璃幕墻結構設計［M］.上海：同濟大學出版社，2007.
［3］JGJ 102—2003 玻璃幕墻工程技術規范［S］. 北京：中國建筑工業出版社，2003．
［4］prEN 13474-1-1999 Glass in building-Design of glass panes-Part 1:General basis of design［S］. European Committee for Standardization Draft,1999.
［5］陶志雄，張其林，陳俊，等. 四邊簡支夾層玻璃受彎承載力試驗研究及有限元分析［J］.建筑結構學報，2010，31(10)：114-119.
［6］王新敏.Ansys工程結構數值分析［M］.北京：人民交通出版社，2007.
- 下載地址
-
