- 摘 要
-
(中衡設計集團股份有限公司, 蘇州 215123)
摘要: 某高層酒店辦公樓的平面呈現明顯的“Z 形”,存在組合平面、扭轉不規則及躍層斜柱等不規則項,并通過大跨鋼連廊與裙房相連. 結合項目主要特點,詳細介紹了結構設計要點,對細腰區域樓板及豎向構件、躍層斜柱等關鍵構件制定了相應的抗震加強措施?并通過地震作用下的整體分析計算,對結構抗震性能進行了驗證,基于分析結果對薄弱部位進行了加強. 分析結果表明,結構具有良好的剛度、承載力及變形耗能能力,符合規范和抗震概念設計要求.
關鍵詞: “Z 形”平面;高層建筑;躍層斜柱;抗震加強措施;專項分析
中圖分類號:TU973 文獻標志碼:A 文章編號:1002-848X(2022)20-0092-07
DOI:10.19701 / j.jzjg.ZJ220014
Design and analysis of a high-rise structure with “Z-shaped” plane
SHEN Xiaoming, WANG Peng, YANG Lülei, SUN Yibin, CUI Jian
(ARTS Group Co. , Ltd. , Suzhou 215123, China)
Abstract: The plane of a high-rise hotel office building presents an obvious “Z-shape”, there are irregular items such ascombined planes, torsional irregularities and jump-storey inclined columns, and the buildings are connected to the podiumthrough large-span steel corridors. Combined with the main features of the project, the main points of structural design wereintroduced in detail, and corresponding seismic strengthening measures were formulated for key components such as floorslabs in the slender waist area, vertical components, and jump-storey inclined columns. The seismic performance of thestructure was verified through the overall analysis and calculation under the action of earthquake, and the weak parts werestrengthened based on the analysis results. The analysis results show that the structure has good stiffness, bearing capacityand deformation energy dissipation capacity, which meets the requirements of specification and seismic conceptual design.
Keywords: “ Z-shaped ” plane;high-rise building;jump-storey inclined column;seismic strengthening measure?specialized analysis
第一作者:沈曉明,碩士,高級工程師,一級注冊結構工程師,主要從事大跨空間鋼結構和復雜高層建筑的結構設計工作,Email: shenxiaoming@ artsgroup. cn.
[引用本文] 沈曉明,王鵬,楊律磊,等. 某“Z 形”平面高層結構設計與分析[J]. 建筑結構,2022,52(20):92-98.SHEN Xiaoming,WANG Peng,YANG Lülei,et al. Design and analysis of a high-rise structure with “Z-shaped” plane[J].Building Structure,2022,52(20):92-98.
