- 摘 要
-
(1 中國建筑西南設計研究院有限公司, 成都 610041; 2 浙江大學高性能結構研究所, 杭州 310058;3 浙江工業大學土木工程學院, 杭州 310014)
摘要: 《鋼結構設計標準》(GB 50017—2017)對鋼梁采用彎矩調幅法的設計要點進行了詳細規定,但彎矩調幅法的實際應用依然不多. 根據《鋼結構與鋼-混凝土組合結構設計方法》,詳細介紹了鋼結構采用彎矩調幅法的應用意義、理論背景、適用條件和構造要求等. 以期介紹的相關內容能夠促進彎矩調幅法在鋼結構設計中的應用.
關鍵詞: 鋼結構; 彎矩調幅法; 構造要求
中圖分類號:TU391 文獻標志碼:A 文章編號:1002-848X(2023)06-0150-04
DOI:10. 19701 / j. jzjg. LZ2205
Understanding and application of Design method for steel structures and steel—concrete combined structures—moment modulation method
ZHOU Jia1, TONG Genshu2, LIU Yifeng1, LI Changhong1, PAN Yu1, ZHAO Qin3
(1 China Southwest Architectural Design & Research Institute Co. , Ltd. , Chengdu 610041, China; 2 Instituteof High-Performace Structures, Zhejiang University, Hangzhou 310058, China; 3 College of Civil Engineering,Zhejiang University of Technology, Hangzhou 310014, China)
Abstract:The design points of steel beam using moment modulation method were stipulated in detail by Steel structuredesign standard (GB 50017—2017), but the practical application of moment modulation method is still few. According tothe Design method for steel structures and steel-concrete combined structures, the application significance, theoreticalbackground, applicable conditions and construction requirements of the moment modulation method design in steelstructures were introduced in detail. It is hoped that the introduction of related content can promote the application ofmoment modulation method in steel structure design.
Keywords:steel structure; moment modulation method; construction requirements
∗中國建筑西南設計研究院有限公司重點課題(R-2021-08-S-A-2023),浙江省建設科研項目(2021K091).
第一作者:周佳,碩士,高級工程師,一級注冊結構工程師,主要從事鋼結構、組合結構和復雜結構的設計研究,Email:83294306@ qq. com.
[引用本文] 周佳,童根樹,劉宜豐,等. 《鋼結構與鋼-混凝土組合結構設計方法》的理解與應用———彎矩調幅法[J]. 建筑結構,2023,53(6):150-153. ZHOU Jia,TONG Genshu,LIU Yifeng,et al. Understanding and application ofDesign method for steel structures and steel-concrete combined structures—moment modulation method [ J]. BuildingStructure,2023,53(6):150-153.
- 下載地址
-
