- 摘 要
-
(1 上海通正鋁結構建設科技有限公司, 上海 201106; 2 上海建科鋁合金結構工程研究院,上海 201199; 3 中國建筑第八工程局有限公司總承包公司, 上海 200135; 4 江蘇湯臣新材料科技有限公司, 泰興 225542; 5 中國建筑設計研究院有限公司, 北京 100044)
摘要: 江蘇園博園未來花園項目采用單層不銹鋼傘殼結構作為承重結構,巨幅有機玻璃作為屋面,上覆 100mm深的水幕. 長 355m 的不銹鋼結構連成整體,根據有限元計算結果設置 3 條溫度施工縫,采取后焊接的方式釋放溫度應力,并通過拋光處理實現鏡面效果. 通過現場聚合工藝將預制有機玻璃板件、肋條連成直徑 21m 的圓形屋面,每個圓之間填充柔性硅膠條釋放溫度變形. 采用分區分塊施工方法,不銹鋼結構與有機玻璃屋面交叉施工,并通過調平措施確保有機玻璃屋面的平整性.
關鍵詞: 江蘇園博園未來花園; 不銹鋼傘殼; 有機玻璃屋面; 溫度應力; 拋光處理; 現場聚合; 調平
中圖分類號:TU318 文獻標志碼:A 文章編號:1002-848X(2023)08-0017-06
DOI:10. 19701 / j. jzjg. ZJ230006
Design and construction technology of stainless steel umbrella shell and huge acrylic water curtain roof in Future Garden
LI Zhiqiang1,2, OUYANG Yuanwen1,2, SUN Xiaoyang3, TANG Yuesheng4, SUN Zhou5, FENG Yi4
(1 Shanghai Tongzheng Aluminum Structure Construction & Technology Co. , Ltd. , Shanghai 201106, China; 2 ShanghaiJianke Aluminum Structure & Engineering Research Institute, Shanghai 201199, China; 3 General Contract EngineeringCompany, China Construction Eighth Engineering Division Co. , Ltd. , Shanghai 200135, China; 4 Jiangsu DonchampNew Materials Technology Co. , Ltd. , Taixing 225542, China; 5 China Architecture Design and Research InstituteCo. , Ltd. , Beijing 100044, China)
Abstract:The Jiangsu Garden EXPO Park Future Garden adopts the single-layer stainless steel umbrella shell structure asthe load-bearing structure, the huge acrylic as the roof and the water curtain with a depth of 100mm. The 355m longstainless steel structure is connected as a whole. According to the finite element calculation results, three constructiontemperature stress release zones were set up to release the temperature stress by post welding. And then the mirror effect ofstainless steel structure was realized through polish process. The prefabricated acrylic panels and ribs were connected toform a 21m diameter circular roof through an on-site polymerization process, and flexible silica gel strips were filledbetween each circle to release temperature deformation. The whole building were divided into several construction zones,then stainless steel structure and acrylic roof were constructed in sequence. And the leveling procedure was adopted toensure the flatness of acrylic roof.
Keywords:Jiangsu Garden EXPO Park Future Garden; stainless steel umbrella shell; acrylic roof; temperature stress;polish process; on site polymerization; leveling
∗住房與城鄉建設部研究開發項目“有機玻璃在建筑與結構領域的應用技術研究” (K20200452).
第一作者:李志強,博士,高級工程師,主要從事大跨度空間結構、鋼結構、鋁合金結構的設計、研發、施工等,Email:512170218@ qq. com.
[引用本文] 李志強,歐陽元文,孫曉陽,等. 未來花園不銹鋼傘殼與巨幅有機玻璃水幕屋面設計與施工技術[ J].建筑結構,2023,53(8):17-22. LI Zhiqiang,Ouyang Yuanwen,Sun Xiaoyang,et al. Design and construction technology ofstainless steel umbrella shell and huge acrylic water curtain roof in Future Garden[ J]. Building Structure,2023,53(8):17-22.
- 下載地址
-
