- 摘 要
-
(1 河北省混凝土質量檢測技術創新中心, 廊坊 065000;2 廊坊市陽光建設工程質量檢測有限公司, 廊坊 065000)
摘要: 為提高實體結構混凝土抗壓強度檢測精度,在總結了回彈法檢測混凝土抗壓強度的幾點不足的基礎上,提出了采用兩種標稱能量回彈儀協同檢測混凝土抗壓強度的組合回彈法,利用標稱能量為 2. 207J 和 4. 5J 回彈儀兩種回彈儀分別對混凝土試件澆筑側面進行回彈,得到組合回彈值. 依據不同強度等級試件的試驗數據繪制組合回彈值與混凝土抗壓強度散點圖,利用最小二乘法對試驗數據進行回歸,擬合得到組合回彈法測強曲線公式,并給出組合回彈法檢測技術的操作方法,提出組合系數的概念. 最后,對實體工程結構構件采用組合回彈法進行檢測,并與鉆芯法測試結果進行對比. 結果表明,組合回彈法測強曲線公式具有較高的精度,組合回彈法較之前的回彈檢測方法具有更高的準確率.
關鍵詞: 組合回彈法; 混凝土; 抗壓強度; 回彈儀; 相關性; 檢測技術
中圖分類號:TU502+. 2 文獻標志碼:A 文章編號:1002-848X(2023)10-0091-06
DOI:10. 19701 / j. jzjg. LS210394
Study on testing compressive strength of concrete by combined rebound method
LIU Yan1,2
(1 Hebei Concrete Quality Testing Technology Innovation Center, Langfang 065000, China; 2 Langfang YangguangConstruction Engineering Quality Testing Co. , Ltd. , Langfang 065000, China)
Abstract: In order to improve detecting accuracy of concrete compressive strength of solid structure, on the basis ofsummarizing the shortcomings of the rebound method to detect the compressive strength of concrete, a combined reboundmethod using two nominal energy rebound instruments to jointly detect the compressive strength of concrete was proposed,and the combined rebound value was obtained by using two rebound instruments with nominal energy of 2. 207J and 4. 5J torebound the pouring side of the concrete specimens. According to the test data of different strength grade specimens, thescatter plot of the combined rebound value and concrete compressive strength were drawn, and the test data were regressedby the least squares method, and the strength curve formula of the combined rebound method was obtained by fitting. Theoperation method of combined rebound detection technology was given, and the concept of combined coefficient wasproposed. Finally, the combined rebound method was used to detect the structural components of the solid engineeringstructure, and the test results were compared with results of the core drilling method. The results show that the strengthcurve formula of the combined rebound method has higher accuracy and the combined rebound method has higher accuracythan the previous rebound detection method.
Keywords:combined rebound method; concrete; compressive strength; rebound meter; correlation; detection technology
作者簡介:劉巖,學士,高級工程師,一級注冊結構工程師,主要從事混凝土無損檢測研究工作,Email:543188891@ qq. com.
[引用本文] 劉巖. 組合回彈法檢測混凝土抗壓強度研究[J]. 建筑結構,2023,53(10):91-96. LIU Yan. Study ontesting compressive strength of concrete by combined rebound method[J]. Building Structure,2023,53(10):91-96.
