- 摘 要
-
(1 西安市建筑設計研究院有限公司, 西安 710054; 2 西安建筑科技大學設計研究總院, 西安 710055)
摘要: 西咸空港綜合保稅區事務服務辦理中心結構高度 29m,為不規則空間曲面混合框架結構. 采用一系列沿球面經線放射狀布置的箱形曲線鋼管承重鋼肋,實現了建筑空間曲面造型;利用屈曲約束支撐靈活布置的特點,解決了南北建筑不規則平面的剛度不均勻問題;采用金屬摩擦擺全向滑動支座,解決了南北建筑獨立單元地震作用下相互影響問題. 采用 YJK 和 MIDAS Gen 軟件分別對結構進行小震彈性及中震彈性、中震不屈服分析. 結果表明,結構受力性能滿足要求,可以達到抗震性能的設計目標.
關鍵詞: 空間曲面混合框架結構; 曲面肋梁; 屈曲約束支撐; 滑動支座; 抗震設計
中圖分類號:TU318+. 2 文獻標志碼:A 文章編號:1002-848X(2023)11-0007-06
DOI:10. 19701 / j. jzjg. 20201576
Design and analysis of composite frame structure of a space curved surface in Xi’an
XU Wen1, LI Gang2, FANG Gang1
(1 Xi’an Architectural Design and Research Institute Co. , Ltd. , Xi’an 710054, China;2 Design & Research Institute of Xi’an University of Architecture & Technology, Xi’an 710055, China)
Abstract: The structure of business service center of Xi’an Airport Comprehensive Bonded Zone is 29m high, which is acomposite frame structure of space curved surface. A series of load-bearing steel ribs with box curves arranged radiallyalong the spherical longitude line were adopted to realize the curved shape of building space. The flexible arrangement ofbuckling restrained brace was utilized to solve the problem of uneven stiffness of irregular planes in north and southbuildings. The omnidirectional sliding bearing with metal friction pendulum was adopted to solve the problem of theinteraction between the north and south building independent units under earthquake action. YJK and MIDAS Gen softwarewere used to carry out analysis of the small earthquake elasticity, medium earthquake elasticity and medium earthquakenon-yield of the structure. The results show that the mechanical performance of the structure meets the requirements and thedesign goal of seismic performance can be achieved.
Keywords:composite frame structure of space curved surface; curved ribbed beam; buckling restrained brace; slidingbearing; seismic design
第一作者:徐雯,學士,高級工程師,一級注冊結構工程師,主要從事建筑結構設計及復雜結構研究工作,Email:602019649@qq. com.
[引用本文] 徐雯,李剛,房剛. 西安某空間曲面混合框架結構設計與分析[J]. 建筑結構,2023,53(11):7-12. XUWen,LI Gang,FANG Gang. Design and analysis of composite frame structure of space curved surface in Xi’ an [ J].Building Structure,2023,53(11):7-12.