884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

(湖南工學院土木與建筑工程學院， 衡陽 421002)

［摘要］鋼筋的有效連接是裝配式結構必須解決的核心問題之一。采用符合《鋼絲繩夾》（GB/T 5976—2006）不銹鋼卡件將鋼筋進行機械搭接，研究此類連接方式的有效性。分別對采用兩卡件和三卡件鋼筋機械搭接的試件進行單向拉伸試驗，試驗表明：提高卡件數量、增加U型卡件與鋼筋之間接觸面積，對于提高鋼筋搭接連接的可靠性具有重要意義；當采用三卡件時，鋼筋的連接強度大于母材的強度，搭接試件的應力-應變曲線與母材應力-應變曲線基本一致，滿足工程應用的力學要求，可應用于裝配式剪力墻受力鋼筋的等強連接。 

［關鍵詞］鋼筋連接；機械搭接；裝配式剪力墻；試驗研究 

中圖分類號：TU398+.2 文獻標識碼：A文章編號：1002-848X(2021)20-0110-05

Study on axial tensile test of mechanical lapping of steel bars in prefabricated shear walls 

YOU  Chunhua,  HE  Gen,  MEI  Hua,  SU  Wanlin,  HOU  Lei 

(School of Civil and Architecture Engineering，Hunan Institute of Technology, Hengyang 421002，China) 

Abstract: The effective connection of steel bars is one of the core problems that must be solved in prefabricated structures. Steel bars were mechanically overlapped by stainless steel grips in accordance with Wire Rope Grips (GB/T 5976—2006), and the effectiveness of this kind of connection method was studied. The unidirectional tensile tests were carried out on the specimens with two and three grips of  mechanical lapping of steel bars. The results show that increasing the number of grips and increasing the contact area between U-shaped grips and steel bar is of great significance to improving the reliability of steel bar lap connection. When three grips are used, the connection strength of steel bar is greater than that of the base metal, and the stress-strain curve of the lap specimen is basically the same as that of the base metal, which meets the mechanical requirements of engineering application and can be applied to the equal-strength connection of the stressed steel bar of prefabricated shear wall. 

Keywords:steel bar connection； mechanical lap； prefabricated shear wall； experimental research

*衡陽市科技局產學研項目(2019jhzx1173)，湖南省教育廳科研項目(19C0526)，衡陽市科技局產學研項目（202002072538）。

 作者簡介：游春華，博士，副教授，Email:2005001486@ hnit.edu.cn。