- 摘 要
-
（1 浙江工業大學土木工程學院， 杭州 310014；2 浙江工業大學工程設計集團有限公司， 杭州 310014）
［摘要］針對門式剛架冷彎薄壁Z形檁條，提出通過附加綴板的加固方式提高Z形檁條的穩定性能及承載能力。然后利用ABAQUS軟件建立了對于Z形檁條的單側斜撐式綴板加固模型、雙側斜撐式綴板加固模型以及單側L形綴板加固模型，并對其進行非線性屈曲分析，研究了不同加固間距情況下3種增設綴板加固方案對于4，6，7.5m長Z形檁條的穩定性能和強度性能的提升效果。計算結果表明，綴板加固方案適用于長度較大的檁條加固，且雙側加設綴板的加固方案較單側加設綴板的加固方案更能有效提升Z形檁條的屈曲荷載以及承載能力。
［關鍵詞］冷彎薄壁型鋼；Z形檁條；綴板；加固措施；屈曲荷載
中圖分類號：TU394文獻標識碼：A文章編號：1002-848X(2021)07-0078-07
Finite element analysis of reinforcement of cold-formed thin-walled Z-shaped purlin
ZHANG Kai1, CHEN Ruisheng2, SHI Tao1
（1 College of Civil Engineering, Zhejiang University of Technology, Hangzhou 310014, China;2 Zhejiang University of Technology Engineering Design Group Co., Ltd., Hangzhou 310014, China）
Abstract:Aiming at the cold-formed thin-walled Z-shaped purlins of the portal frame, a reinforcement method was put forward to improve the stability and bearing capacity of the Z-shaped purlin by adding batten plates. Then ABAQUS software was used to establish three models for Z-shaped purlins including unilaterally braced batten plate reinforcement model, bilaterally braced batten plate reinforcement model and unilateral L-shaped batten plate reinforcement model, and the nonlinear buckling analysis was carried on. The improvement effects of three additional batten plate reinforcement schemes on the stability and strength performance of 4m, 6m and 7.5m long Z-shaped purlins under different reinforcement spacing were studied. The calculation results show that the batten plate reinforcement scheme is suitable for the reinforcement of longer purlins, and the bilaterally braced batten plate reinforcement scheme can effectively improve the buckling load and bearing capacity of the Z-shaped purlin than the unilaterally braced batten plate reinforcement scheme.
Keywords:cold-formed thin-walled steel;Z-shaped purlin;batten plate;reinforcing measure;buckling load
作者簡介：張楷，碩士研究生，Email: 530586089@qq.com；通信作者：陳瑞生，碩士，高級工程師，一級注冊結構工程師，Email: ruisch@163.com。
