- 摘 要
-
(成都基準方中建筑設計有限公司， 成都 610031)
［摘要］基于某工程懸挑結構的加長方案，提出了增大截面、屋面吊掛、增設拉桿以及增設型鋼支撐這幾種加固方案，對比分析各加固方案后，最終選擇增設型鋼支撐這一組合加固方案。為研究加固節點的受力性能，采用ABAQUS軟件對節點進行模擬加載，分析節點在設計荷載（1.3恒載+1.5活載）及1.2倍設計荷載作用下的材料應力及塑性應變開展過程。結果表明，在設計荷載作用下，節點的懸挑梁支座處出現了一定的塑性應變，但并未隨荷載加大而繼續擴展，說明加固后的節點具有足夠的承載力，能夠滿足改造后的建筑功能要求，組合加固法在該工程中是安全可行的。最后，對組合加固法在施工過程中的重點、難點進行總結，為后續改造工程提供參考。
［關鍵詞］懸挑梁；組合加固；增大截面法；屋面吊掛法；增設拉桿法；增設型鋼支撐法
中圖分類號：TU375-1 文獻標識碼：A文章編號：1002-848X(2021)16-0097-05
Research on mechanical properties of compositely reinforced concrete cantilever beam by composite reinforcement method
LUO Yongcheng, QIAO Xudong, GUO Chuan, WU Bing, YANG Jianbing
(Chengdu JZFZ Architectural Co., Ltd., Chengdu 610031，China)
Abstract: Based on the extension scheme of the cantilever structure in a project, several reinforcement schemes were proposed, such as increasing cross-section, roof hanging, adding steel tie rods and adding structural steel supports. After comparing and analyzing each reinforcement scheme, the combined reinforcement scheme of adding structural steel supports was finally chosen. In order to study the mechanical performance of the reinforced joints, ABAQUS software was used to simulate the loading of the joints and analyze the material stress and plastic strain development process of the joints under the design load (1.3 dead load +1.5 live load) and 1.2 times the design load. The results show that under the design load, a certain plastic strain appears at the cantilever beam support of the joint, but it does not continue to expand with the increase of the load, which indicates that the reinforced joint has enough bearing capacity to meet the functional requirements of the reconstruction building, and the combined reinforcement method is safe and feasible in this project. Finally, the key points and difficulties of the combined reinforcement method in the construction process were summarized to provide reference for subsequent reconstruction projects.
Keywords:cantilever beam； composite reinforcement； increasing cross-section method； roof hanging method； additional steel tie rod method； additional structural steel support method
作者簡介：羅永成，碩士，工程師，Email: 415670916@qq.com； 通信作者：譙旭東，碩士，工程師，Email：qiaoxudong100@126.com。
- 下載地址
-
