- 摘 要
-
(山東華科規劃建筑設計有限公司， 聊城 252000)
［摘要］實際工程平面復雜多變，凹凸規則性的判斷已超出有關規范的示例范圍，初步探討了如何根據有關規范條文及示例判斷工程平面規則性，從而對不規則平面采取相應的加強措施。經分析研究，補充了凹凸規則性判斷標準；對凹口處不規則加強方式和加強標準提出了建議；明確了挑板邊可作為判斷凹凸規則性的基準線。
［關鍵詞］平面凹凸規則性；加強措施；平面凹凸基準線
中圖分類號：TU318 文獻標識碼：A文章編號：1002-848X(2021)15-0051-03
Discussion on judgment of regularity of complex plane concavity and convexity
LI Xianjie, RUAN Xingqun, LIU Xiaobo, MENG Fantao
(Shandong Huake Planning Architectural Design Co., Ltd., Liaocheng 252000， China)
Abstract: The plane of actual engineering building is complex and changeable, and the judgment of the regularity of concavity and convexity has exceeded the scope of the examples of the relevant specifications. How to judge the regularity of the engineering plane according to the provisions and examples of the relevant specifications was preliminarily discussed, so as to take the corresponding strengthening measures for the irregular plane. After analysing and researching, the standard for judging the regularity of concavity and convexity was supplemented. Suggestions on irregular strengthening methods and strengthening standards of notch areas were put forward. It is clear that the edge of the cantilever plate can be used as the baseline to judge the regularity of concavity and convexity.
Keywords:regularity of plane concavity and convexity； strengthening measure； plane concavity and convexity baseline
作者簡介：李顯杰，學士，高級工程師，一級注冊結構工程師，Email: jzsjylxj@126.com。
