- 摘 要
-
(深圳市建筑設計研究總院有限公司北京分院, 北京 100195)
[摘要]九江國際金融廣場A1#樓建筑結構高度299.3m,采用型鋼混凝土(鋼)框架-核心筒混合結構體系。介紹了A1#樓的工程特點和結構分析情況,采用PKPM-SATWE軟件進行了多遇地震作用下的彈性分析,采用Perform 3D軟件進行了罕遇地震作用下的動力彈塑性時程分析。結果表明:結構能滿足設定的抗震性能目標。針對結構超限情況采用性能化設計方法,并探討了環帶桁架設計方法,為同類型超高層設計提供一些借鑒。
[關鍵詞]超高層建筑;混合結構;抗震性能化設計;動力彈塑性時程分析
中圖分類號:TU318 文獻標識碼:A文章編號:1002-848X(2021)13-0015-07
Structural design of super high-rise building A1# in Jiujiang International Financial Plaza
ZHANG Yong, HAN Jisheng
(Shenzhen Central Institute of Architectural Design and Research Co., Ltd., Beijing Branch Institute, Beijing 100195, China)
Abstract: The structure height of A1# building in Jiujiang International Financial Plaza is 299.3m, which adopts the steel reinforced concrete (steel) frame-core tube hybrid structure system. The engineering characteristics and structural analysis of A1# building were introduced. PKPM-SATWE software was used to perform elastic analysis under frequent earthquakes, and Perform 3D software was used to perform dynamic elastoplastic time history analysis under rare earthquakes. The results show that the structure can meet the set seismic performance target. The performance-based design method was adopted for the structural out-of-limit situation, and the ring-belt truss design method was discussed to provide some reference for the design of the same type of super high-rise buildings.
Keywords:super high-rise building; hybrid structure; seismic performance design; dynamic elastoplastic time history analysis
作者簡介:張勇,碩士,高級工程師,一級注冊結構工程師,Email: zayond@qq.com。
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!