884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

（1 中國建筑西南設計研究院有限公司， 成都 610042；  2 成都建工預筑科技有限公司， 成都 610011）

［摘要］成都建工預筑科技研發中心采用裝配整體式框架結構，裝配率93%。結合十三五國家重點研發計劃研究成果，以項目為例闡述了框架梁柱節點、密拼空心疊合板、雙T板、外墻掛板節點等設計細節，為同類項目提供參考和借鑒。其中梁柱節點采取了一系列的措施，在滿足承載力前提下，充分考慮節點區鋼筋布置方式，方便預制構件制作和安裝；  密拼空心疊合板和雙T板的應用，避免了后澆帶整體式接縫的鋼筋桁架疊合板制作安裝困難、支撐多、造價高等缺點；  外掛墻板節點不僅能滿足承載力要求，而且能適應主體結構變形，安裝方便。

［關鍵詞］裝配整體式框架結構；  高裝配率；  密拼空心疊合板；  雙T板；  外墻掛板節點

中圖分類號：TU318文獻標識碼：A文章編號：1002-848X(2020)19-0117-07

Design of assembly structure in Chengdu Construction Engineering Pre-built Technology R&D Center

DENG Shibin1, XU Mingjiao1, BI Qiong1, LEI Yu1, WU Jing1, KONG Wenyi2, DONG Bo1, LI Bo1

（1 China Southwest Architectural Design and Research Institute Co., Ltd., Chengdu 610042, China; 2 Chengdu Construction Engineering Pre-built Technology Co., Ltd., Chengdu 610011, China）

Abstract:Chengdu Construction Engineering Pre-built Technology R&D Center adopts an integrated frame structure system, the assembly rate is 93%. Combined with the research results of 13th Five-Year National Key R&D Plan, the project was used as an example to illustrate the design details of frame beam-column joints, hollow close\|fitting composite slabs, double T slabs and external panel joints, providing reference for similar projects. Among them, a series of measures have been adopted for the beam-column joints. Under the premise of satisfying the bearing capacity, the arrangement of steel bars in the joint area is fully considered to facilitate the production and installation of prefabricated components; the application of hollow close-fitting composite slab and double T slab avoids post-casting belts Integral joint reinforced truss composite panels have disadvantages such as difficult production and installation, multiple supports, and high cost; external panel joints can not only meet the requirements of bearing capacity, but also adapt to the deformation of the main structure and are easy to install.

Keywords:assemble integral frame structure; high assembly rate; hollow close-fitting composite slab; double T slab; external panel joint

*“十三五”國家重點研發計劃項目（2016YFC0701900）。

作者簡介：鄧世斌，碩士，高級工程師，Email:29383509@qq.com；  通信作者：許明姣，碩士，高級工程師，Email:835071966@qq.com。