- 摘 要
-
(1 河北工業大學土木與交通學院, 天津 300401;2 中國建筑標準設計研究院有限公司, 北京 100044)
[摘要]鋼-混凝土雙面組合作用連續梁是一種新型組合梁,采用ABAQUS有限元軟件以變參數的方式對其進行了有限元模擬,共開展了10個有限元模型的研究分析,并據此進行試驗設計。模型的變化參數包括下部混凝土板的寬度、厚度和長度。分析結果表明:下部混凝土板厚度、長度和寬度均對組合梁剛度影響較大; 對組合梁極限承載力影響較大的參數只有下部混凝土板厚度; 與鋼-混凝土單面組合作用連續梁相比,鋼-混凝土雙面組合作用連續梁在剛度和承載力方面有明顯優勢,具有較大的工程應用價值。
[關鍵詞]鋼混凝土雙面組合作用連續梁; 試驗設計; 剛度; 極限承載力
中圖分類號:TU398-9文獻標識碼:A文章編號:1002-848X(2020)17-0084-07
Finite element analysis and experimental design of steel-concrete double-sided composite continuous beams
LI Yang1, XING Wanli2, DING Jingzhen2, REN Peiqi2, LI Yantao1, LIU Guoyou2
(1 School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401,China;2 China Institute of Building Standard Design & Research, Beijing 100044, China)
Abstract:The steel-concrete double-sided composite continuous beam is a new type of composite beam. Finite element simulation in a variable-parameter manner was carried out by using ABAQUS finite element software, and 10 finite element analysis models were carried out, and the experimental design was carried out according to the simulation results. The variation parameters of the model include the width, thickness and length of the lower concrete slab. The analysis results show that the thickness, length and width of the lower concrete slab have a great influence on the stiffness of the composite beam; the parameters have a greater influence on the ultimate bearing capacity of the composite beam are only the thickness of the lower concrete slab. Compared with the conventional steel-concrete single-sided composite continuous beam, the steel-concrete double-sided composite continuous beam has obvious advantages in rigidity and bearing capacity, and has great engineering application value.
Keywords:steel-concrete double-sided composite continuous beam; composite beam; experimental design; stiffness; ultimate bearing capacity
*國家重點研發計劃“綠色建筑及建筑工業化”重點專項(2017YFC0703401)。
作者簡介:李楊,碩士,Email:1823144583@qq.com; 通信作者:邢萬里,碩士,高級工程師,Email:282971374@qq.com。
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!