- 摘 要
-
（1 華南理工大學建筑設計研究院有限公司， 廣州 510640;2 華南理工大學亞熱帶建筑科學國家重點實驗室， 廣州 510640）
［摘要］《裝配式建筑評價標準》（GB/T 51129—2017）和廣東省《裝配式建筑評價標準》（DBJ/T 15163—2019）是目前評價廣東省裝配式建筑等級的標準。對兩個標準的評價項目、計分方法以及分值比例等評價要素進行對比分析，并采用兩個標準分別對三棟裝配式建筑進行裝配率計算。結果表明：省標結合新型工業化建筑的發展特點，設置細化項和鼓勵項，擴大得分比例范圍。按省標計算得出的裝配率高于按國標計算得出的裝配率。對于現階段廣東省的裝配式建筑發展而言，省標發揮了更強的鼓勵作用。
［關鍵詞］裝配式建筑； 評價標準； 裝配率； 細化項； 鼓勵項； 評分項指標
中圖分類號：TV334， TU318， TU741文獻標識碼：A文章編號：1002-848X(2020)17-0013-08
Comparative analysis of scoring item index of prefabricated building evaluation standards
HUANG Ze1, YANG Lihuan1, HE Haiqu1, WANG Fan1,2
(1 Architectural Design and Research Institute, South China University of Technology, Guangzhou 510640, China;2 State Key Laboratory of Subtropical Building Science, South China University of Technology, Guangzhou 510640, China)
Abstract:Standard for assessment of prefabricated building (GB/T 51129—2017) and Standard for assessment of prefabricated building (DBJ/T 15163—2019) are the current standards for evaluating prefabricated building grades in Guangdong province. The evaluation elements of the two standards were compared and analyzed, such as evaluation items, scoring methods and score proportion, and the assembly rate of three prefabricated buildings by using the two standards were calculated. The results show that the provincial standard combines the development characteristics of new industrialized buildings, sets up detailed items and encouraging items, and expands the scale of scores. The assembly rate calculated by provincial standard is higher than that calculated by national standard. For the development of prefabricated building in Guangdong province, the provincial standard has played a more encouraging role.
Keywords:prefabricated building; evaluation standard; assembly rate; detailed item; encouraging item; scoring item index
作者簡介：黃澤，碩士，工程師，Email:792465072@qq.com;通信作者：王帆，博士，教授級高級工程師，Email: wangfan@scut.edu.cn。
- 下載地址
-
