- 摘 要
-
（筑博設計股份有限公司， 深圳 518035）
［摘要］針對聯想泰倫廣場塔樓的復雜建筑需求，分別從施工工藝、造價、材料用量等方面綜合考慮，從3種結構方案中比選出了一種相對最優的結構方案，即轉換層以下采用鋼筋混凝土框架-核心筒結構，轉換層以上采用帶鋼結構桁架轉換的方鋼管混凝土框架-核心筒結構。分別從小震、中震、大震等方面進一步分析了結構計算模型的合理性及結構方案的可行性；由于結構的復雜性及特殊性，針對結構分析與設計時轉換桁架設置的必要性、塔樓結構整體穩定性、躍層柱的穩定性等重難點問題進行了專項分析論證。結果表明，工程中采用的結構方案達到了預定的性能目標的要求。
［關鍵詞］聯想泰倫廣場； 結構方案比選； 高位桁架轉換； 彈塑性時程分析； 施工模擬分析
中圖分類號：TU318文獻標識碼：A文章編號：1002-848X(2020)14-0010-10
Comparison and design of tower structure schemes of Lenovo Taylor Square
KE Yuwei, LI Bin, HE Baohua, LI Hongbo
(Zhubo Architectural & Engineering Design Co．， Ltd．， Shenzhen 518035， China)
Abstract:Aiming at the complex construction needs of the towers of Lenovo Taylor Square, comprehensive considerations were made in terms of construction technology, cost, material consumption, etc., and a relatively optimal structural scheme was selected from the three structural schemes. Reinforced concrete frame-core tube structure was adopted below the conversion layer, and square steel tube concrete frame-core tube structure with steel structure truss conversion was adopted above the conversion layer. The rationality of the structural calculation model and the feasibility of the structural scheme were further analyzed from the aspects of frequent earthquake, moderate earthquake and rare earthquake. Due to the complexity and particularity of the structure, a special analysis and demonstration were conducted on the key issues such as the necessity of the conversion truss setting during structural analysis and design, the overall stability of the tower structure, and the stability of the cross-layer columns. The results show that the structural scheme adopted in the project meets the requirements of the predetermined performance objectives.
Keywords:Lenovo Taylor Square； comparison and selection of structural scheme; high truss conversion; elastoplastic time history analysis; construction simulation analysis
作者簡介：柯玉偉，碩士，高級工程師，一級注冊結構工程師，Email:kywjade@163.com。
