- 摘 要
-
（中國建筑設計研究院有限公司， 北京 100044）
［摘要］石油科技國際研發中心由四個區組成，設計時根據建筑布局及高度，合理設置防震縫，將整個建筑分為6個形狀規則的單獨結構單元，并進行了詳細的計算與分析。多功能廳等多個大空間的平面尺寸及使用荷載均較大，最大達33-6m×42m，同時結構高度受到很大限制，為滿足建筑使用需要，采用了預應力技術,設計時進行了詳細的方案優化及計算分析，合理地布置預應力鋼筋，取得了很好的效果。建筑在2層、3層設置了6個連橋連接各個區，最大跨度達49-7m。經過多個方案對比分析，采用一端固定一端滑動的連接方式與兩端主體結構連接，通過詳細的計算分析和構造措施確保其安全。設計理念可供類似工程參考。
［關鍵詞］預應力梁； 有粘結預應力結構； 大跨度連橋； 滑動支座
中圖分類號：TU318-2文獻標識碼：A文章編號：1002-848X(2019)24-0007-07
Structural design of International Research Center for Petroleum Science and Technology
Liu Jiantao, Wang Chunguang, You Tianzhi
(China Architecture Design & Research Group, Beijing 100044, China)
Abstract:International Research Center for Petroleum Science and Technology is made up of four zones. According to the layout and height of the building, the building was rationally provided with several seismic joints. The whole building was divided into 6 individual buildings with regular shapes and was calculated and analyzed in detail. The plane size and load of some big span rooms, such as multi-function hall, were large. The largest size was 33-6×42 meters，and the height of the structure was limited. In order to meet the needs of building construction, prestressed technology was adopted. During the design, detailed scheme optimization and calculation analysis and reasonable arrangement of the prestressed reinforcement were carried out, and good effect was achieved. The second and third floor of the building was equipped with six corridors connected to each district. The maximum span of the connecting gallery is 49-7 meters. By comparing and analyzing, the connection mode with one end fixed and one end sliding was adopted to connect with the main structure. Detailed structural analysis and construction measures were taken to ensure building safety. The design concept can provide reference for similar projects.
Keywords:prestressed beam; bonded prestressed structure; large span corridor; sliding support
作者簡介：劉建濤，碩士，教授級高級工程師，一級注冊結構工程師，Email:liujt@cadg.cn。
