- 摘 要
-
(1 華南理工大學建筑設計研究院有限公司， 廣州 510641； 2 華南理工大學土木與交通學院， 廣州 510640)
［摘要］玻璃肋作為玻璃幕墻的支承系統可用在層高較高的大堂或共享空間區域，但由于生產和運輸不便等原因需要采用多塊肋板連接成一片整體。采用通用有限元軟件Strand7對玻璃肋的銷釘連接進行有限元分析，闡述了連接節點的受力與破壞機理，并將有限元數值分析結果與試驗破壞荷載值進行對比分析；最后，分析了接觸間隙大小和銷孔內的彈性材料厚度對連接節點承載力設計值的影響，并給出了提高該類節點承載力設計值的建議。
［關鍵詞］玻璃肋； 銷釘連接； 接觸分析； 節點承載力
中圖分類號：TU382文獻標識碼：A文章編號：1002-848X(2019)20-0094-05
Discussion on contact analysis of a pin connection glass rib
Lu Delong1， Wang Peng2
(1 Architectural Design & Research Institute of SCUT Co., Ltd., Guangzhou 510641, China；2 School of Civil Engineering & Transportation, South China University of Technology, Guangzhou 510640, China)
Abstract:In the lobby with high floor height or shared space area, glass ribs can be used as the supporting system for the glass curtain wall. However, due to the inconvenience of production and transportation, it is necessary to connect a plurality of glass ribs into one piece. The finite element analysis of the pin connection of glass ribs was carried out by using the general finite element software Strand7. Finite element models were established for the joints tested. The loading mechanism and failure mechanism of the contact connection between the pin and the glass hole were illustrated and the finite element numerical results were compared with the test failure load. Finally, the influences of the contact gap size in the pin hole and the thickness of the elastic material on the capacity of the pin hole were considered, and the design recommendations were proposed to improve the bearing capacity of this type of joint.
Keywords:glass rib; pin connection; contact analysis; bearing capacity of joint
*中國博士后科學基金（2019M652898），廣東省普通高校青年創新人才類項目（2018KQNCX006）。
作者簡介：陸德龍，碩士，工程師，Email:610486529@qq.com。
