- 摘 要
-
(1 中國五洲工程設計集團有限公司, 北京 100053; 2 清華大學土木水利學院, 北京 100084;3 中南大學土木工程學院, 長沙 410012; 4 哈爾濱工業大學土木工程學院, 哈爾濱 150001)
[摘要]結合華電土右電廠鋼結構間接空冷塔實際工程,對結構體系選擇、荷載分析、抗震設計、裝配式節點設計方法等進行研究,并通過風洞試驗和風致響應分析優化了結構整體性能,通過圍護系統子結構的可靠性試驗研究解決了鋁合金面板及其連接的耐久性問題。提出了針對電廠鋼結構間接空冷塔的一種合理的結構體系,并解決了相關的連接構造問題,較好體現了鋼結構空冷塔自重輕、抗震性能好、裝配速度快及環保節能的特點,工程所采用的結構體系、設計方法及節點連接構造對于類似工程具有借鑒作用。
[關鍵詞]結構體系; 荷載; 裝配式節點; 面板子結構
中圖分類號:TU391, TU279-7+41文獻標識碼:A文章編號:1002-848X(2019)06-0029-07
Study on applied technology of steel indirect air cooling tower for a power plant
Ding Dayi1, Ma Dongxia1, Wang Yuanqing2, Zhu Weiliang1, Shu Chang1, Yang Pengchao1, Zou Yunfeng3, Zhi Xudong4
(1 Wuzhou Engineering Design and Research Institute, Beijing 100053, China; 2 School of Civil Engineering, Tsinghua University, Beijing 100084, China; 3 School of Civil Engineering, Central South University, Changsha 410012, China; 4 School of Civil Engineering, Harbin Institute of Technology, Harbin 150001, China)
Abstract:The project of steel indirect air cooling tower for Huadian Tuyou power plant was studied in perspectives of model selection of structural system, load analysis, seismic design and design method of prefabricated joint. In addition, the overall performance of the structure was optimized by wind tunnel test and wind-induced response analysis. The durability of the aluminum alloy panel and its connections were solved by reliability test of the substructure of the enclosure system. A reasonable structure system for indirect air cooling tower of steel structure in power plant was put forward to solve the related connection structure problems and better reflect the characteristics of light weight, good seismic performance, fast assembly speed, environmental protection and energy saving of steel structure air cooling tower. The structural system, design method and joint connection structure adopted in the project can be used for reference for similar projects.
Keywords:structural system; load; prefabricated joint; panel substructure
作者簡介:丁大益,教授級高級工程師,一級注冊結構工程師,Email:melding@163.com。