884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

（西北工業大學力學與土木建筑學院， 西安 710129）

［摘要］由于鋼結構廠房中圍護墻不承重，在結構設計及施工過程中不被重視，且圍護墻高度一般非常高，導致其容易出現穩定性問題。對某鋼結構廠房砌體圍護墻結構在施工過程中出現的因設計和施工原因造成的諸如圍護墻體缺少側向支撐、圍護墻高厚比過大等安全隱患問題進行了分析，并針對這些問題提出了加固措施，解決了該鋼結構廠房存在的安全隱患。最后，對廠房砌體圍護墻結構的設計提出了建議，可為今后類似工程設計提供借鑒。

［關鍵詞］圍護墻結構； 高厚比； 設計和施工缺陷； 加固

中圖分類號：TU393-3文獻標識碼：A文章編號：1002-848X(2019)14-0085-04

Structural design and construction defect analysis and reinforcement of enclosure wall of a factory building

Ai Bing, Shen Mingxiao, Jiang Changxiang

（School of Mechanics and Civil & Architecture, Northwestern Polytechnical University, Xi′an 710129, China）

Abstract:Because the enclosure wall of steel structure factory building is not load-bearing, it is not taken seriously in the process of structural design and construction, and the height of the enclosure wall is usually very high, which  causes it to be prone to  the stability problem. The hidden safety problems of masonry enclosure wall structure of a steel structure factory building were analyzed, such as lack of lateral support of the enclosure wall and excessive height-thickness ratio of the enclosure wall, which were found in the construction process due to design and construction reasons. The reinforcement measures were put forward to solve these problems and the hidden safety problems existed in the steel structure factory building were solved. Finally, some suggestions were put forward for the design of the masonry enclosure wall structure of the factory building, which could be used as a reference for similar engineering design in the future.

Keywords:enclosure wall structure; height-thickness ratio; design and construction defects; reinforcement

作者簡介：艾兵，博士，副教授，一級注冊結構工程師，Email：aibing15@foxmail.com。