884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

（1 同圓設計集團有限公司， 濟南 250101； 2 長安大學理學院， 西安 710064； 3 濟南市規劃設計研究院建筑分院， 濟南 250101；  4 湖南大學土木工程學院，  長沙 410082）

［摘要］為研究裝配式混凝土框架-填充墻的力學性能，以填充墻高寬比、厚度，墻-柱拉結鋼筋和墻-梁拉結鋼筋數量等參數為變量對裝配式混凝土框架進行有限元分析，通過荷載-位移曲線和裂縫發展變化對有限元模型的計算結果進行了標定。分析結果表明：有限元計算結果與試驗結果吻合性良好，誤差控制在15%以內；隨著填充墻高寬比減小、填充墻厚度增加，框架剛度增大；隨著墻-柱拉結鋼筋連接中配筋率和布置間距增大，結構延性提高；墻-梁拉結鋼筋數量的減少會減小結構的延性。

［關鍵詞］裝配式混凝土； 框架\|填充墻； 有限元分析； 影響因素

中圖分類號：TU375-4文獻標識碼：A文章編號：1002-848X(2019)13-0114-06

Analysis of influencing factors of mechanical properties of precast concrete frame infilled wall

Wang Wei1, Zhang Changhao2,3, Liu Lezhao4

（1 Tong Yuan Design Group Co., Ltd., Jinan 250101, China; 2 College of Science, Chang′an University, Xi′an 710064, China; 3 Department of Architecture， Jinan City Planning and Design Institute, Jinan 250101, China;  4 College of Civil Engineering, Hunan University, Changsha 410082, China）

Abstract:In order to study the mechanical properties of precast concrete frame infilled wall, finite element analysis of precast concrete frame was carried out by taking the ratio of height to width, thickness of infilled wall, number of wall-column and wall-beam reinforcement as parameter variables. The results of finite element model were calibrated by load-displacement curve and crack development. The analysis results show that the finite element calculation results are in good agreement with the test results, and the error control is within 15%. As the ratio of height to width of the infilled wall decreases and the thickness of the infilled wall increases,  the stiffness of the frame increases. The structure ductility increases with the increase of reinforcement ratio and spacing increase in the reinforcement of the wall-column. The decrease of the number of steel bars in the wall-beam will reduce the ductility of the structure.

Keywords:precast concrete; frame infilled wall; finite element analysis; influence factor

作者簡介：王薇，碩士，工程師，Email: tyjsjtww@163.com。