884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

您現在的位置:建筑結構>> 期 刊>> 2019年>> 第03期>>正文內容
基于“抗與放”原則的購物中心超長結構設計
哈敏強,李學偉,周佳
摘 要

(上海三益建筑設計有限公司, 上海 200050)

[摘要]某大型購物中心采用鋼筋混凝土框架結構體系,平面長度228m,為滿足建筑功能不設置永久變形縫,為超長結構。對結構的溫差收縮效應進行有限元分析,并以“抗放兼?zhèn)?rdquo;為原則,綜合運用了傳統抗裂縫技術和釋放溫度應力的新技術。地下室外墻采用誘導縫,使裂縫集中在設置了加強建筑防水的誘導縫位置出現,明顯釋放了外墻混凝土溫度應力。地上部分平面中部各層樓板采用誘導凹槽,既保證了結構整體抗側剛度以滿足抗震要求,又釋放了樓板混凝土溫度應力。

[關鍵詞]超長結構; “抗放兼?zhèn)?rdquo;原則; 誘導縫; 誘導凹槽; 溫度應力

中圖分類號:TU398文獻標識碼:A文章編號:1002-848X(2019)03-0046-06

 

Super-long structural design of shopping mall based on “Resist and Release” Principle

Ha Minqiang, Li Xuewei, Zhou Jia

(Shanghai Sunyat Architecture Design Co., Ltd.,  Shanghai 200050, China)

Abstract:Reinforced concrete frame structural system with a plane length of 228m was adopted in a shopping mall. In order to satisfy the building function, there is no permanent deformation joint, so it is a super-long structure. The finite element analysis of the temperature difference shrinkage effect of the structure was carried out, and the traditional anti-cracking technology and the new technology of releasing temperature stress were comprehensively applied on the basis of the “Resist and Release” Principle. Induced joints were used in basement exterior wall, which made cracks concentrate on the position of induced joints with reinforced building waterproofing measures, and accordingly the concrete temperature stress of exterior wall was released. Induced grooves were used in the mid-floors of the above-ground planes, which not only ensured the overall lateral stiffness of the structure to meet the seismic requirements, but also released the concrete temperature stress of the floorslab.

Keywords:super-long structure; “Resist and Release” Principle; induced joint; induced groove; temperature stress

 

作者簡介:哈敏強,碩士,高級工程師,一級注冊結構工程師,Email:hmqha@163.com。

下載地址

    你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!

    如果你還沒注冊,請趕緊點此注冊吧!

    如果你已經注冊但還沒登錄,請趕緊點此登錄吧!