- 摘 要
-
（1 國網四川省電力公司經濟技術研究院， 成都 610041; 2 同濟大學土木工程學院建筑工程系， 上海 200092）
［摘要］在已有研究的基礎上，針對寬高比大于2-5混凝土錐形擴展基礎提出下壓和上拔優化設計方法?；诂F(xiàn)有常規設計方法及提出的優化設計方法，對四川“500kV山桃Ⅰ,Ⅱ線遷改工程”、“500kV山桃Ⅲ,Ⅳ線遷改工程”進行了設計，并將兩種方法設計出的基礎的鋼筋、混凝土用量等技術經濟指標進行了比較。結果表明，與現有設計方法設計出的常規擴展基礎相比，采用提出的優化設計方法設計得出的大寬高比混凝土錐形擴展基礎能顯著節省混凝土用量，同時鋼筋用量增加有限，整體經濟效益非常明顯。
［關鍵詞］混凝土錐形擴展基礎； 大寬高比； 優化設計方法； 經濟效益
中圖分類號：TU470+.3文獻標識碼：A文章編號：1002-848X(2018)15-0105-05
Engineering case study on cone-shaped spread concrete foundation with large width-to-height ratio based on optimum design method
Hua Cong1, Wang Wenguang1, Li Yuanqi2, Qin Xiaoliang2
(1 State Grid Sichuan Economic Research Institute, Chengdu 610041, China; 2 Department of Structural Engineering, College of Civil Engineering, Tongji University, Shanghai 200092, China)
Abstract:Based on existing studies, a set of optimum design methods for the cone-shaped spread concrete foundation with width-to-height ratio greater than 2-5 under compressive load and uplift load were proposed. With the existing conventional design methods and the optimum design methods proposed, the engineering design of Sichuan “500kV Shantao Ⅰ, Ⅱ Line Relocation Project” and “500kV Shantao Ⅲ, Ⅳ Line Relocation Project” was carried out. The results designed by the two methods, and the technical and economic index, such as the use of steel reinforcement and concrete, were compared. The results showed that, when compared with the traditional spread foundations designed by the existing design method, the use of cone-shaped spread concrete foundations with large width-to-height ratio based on the optimum design method can save the amount of concrete significantly, and the increase of steel reinforcement is limited. The overall economic benefits are obvious.
Keywords:cone-shaped spread concrete foundation; large width-to-height ratio; optimum design method; economic benefit
*國家電網科技項目（52199915002M）。
作者簡介：華聰，碩士，高級工程師，Email：395435458@qq.com。
- 下載地址
-
