- 摘 要
-
（1 鄭州財經學院土木工程學院， 鄭州 450000； 2 廣西建工集團第五建筑工程有限責任公司， 柳州 545001）
［摘要］通過自主研制鋼結構拼裝胎架并將其應用于機場、體育中心等裝配式大型鋼桁架結構工程，發現鋼胎架為工程鋼結構地面拼裝焊接、正立整體拼裝、一次吊裝就位等施工工藝帶來極大便利；通過嚴格控制火焰煨彎等施工工藝，可提高大跨度懸挑弧形桁架的加工、吊裝和拼裝精度，縮短工程施工工期，同時保證作業人員安全。
［關鍵詞］胎架； 鋼桁架結構； 火焰煨彎； 臨時支撐
中圖分類號：TU398-7文獻標識碼：A文章編號：1002-848X(2018)15-0066-05
Development of steel structure assembled bed-jig and its application in large-span steel truss
Ji Shuai1, Lu Jizhong2, Ling Yaqing2, Lin Jun2, Bai Jiejun2
(1 Department of Civil Engineering， Zhengzhou Institute of Finance and Economics, Zhengzhou 450000, China; 2 Guangxi Construction Engineering Group Fifth Construction Engineering Co., Ltd., Liuzhou 545001, China)
Abstract:A steel structure assembled bed-jig was developed and applied in assembled large-scale steel truss structure such as airports and sports centers. This application greatly facilitates construction technologies such as ground assembly and welding, upright entire assembly, and one-time installation. It can improve the accuracy, the lifting and assembly of large-span cantilever trusses, shorten the construction period and ensure the safety of workers by controuing the construction technology of the hot bending of belfast truss strictly.
Keywords:bed-jig; steel truss structure; hot bending; temporary support
作者簡介：姬帥，碩士，講師，Email：603604793@qq.com。
