- 摘 要
-
（大連理工大學建設工程學部， 大連 116024）
［摘要］對壓水堆核電廠核安全相關混凝土結構的荷載和抗力進行了分析，利用一次二階矩方法計算了正常運行和事故工況下核安全相關混凝土結構軸拉、軸壓、受彎、受剪及大偏心受壓構件的可靠指標。綜合考慮國內外不同結構設計規范的目標可靠指標，提出了核安全相關混凝土結構在正常運行和事故工況下的目標可靠指標。研究表明，核安全相關混凝土結構正常運行工況的可靠指標為4-0～5-0；異常工況下的有條件可靠指標為3-0～4-0，無條件可靠指標為4-0～5-0。建議核安全相關混凝土結構正常運行工況的目標可靠指標為4-7；異常工況的有條件目標可靠指標為3-7。
［關鍵詞］核安全相關混凝土結構；可靠度；校準；目標可靠指標
中圖分類號：X946文獻標識碼：A文章編號：1002-848X(2018)16-0029-07
Reliability calibration of nuclear safety related concrete structures in pressurized water reactor nuclear power plant
Gong Jinxin, Wan Guangze
(Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China)
Abstract:The load and resistance of nuclear safety related concrete structures in pressurized water reactor nuclear power plant were analyzed, and the reliability index of nuclear safety related concrete members subjected to axial tension, axial compression, bending, shear and large eccentric compression under normal operation and accident conditions were calibrated using First\|order Second Moment(FOSM) method. After comparison with the target reliability indexes in different design specifications for civil structure at home and abroad, the target reliability indexes of nuclear safety related concrete structures in normal operation and accident case were proposed. It is indicated that the target reliability indexes of nuclear safety related concrete structures are in the range of 4-0～5-0 for the normal operation case, 3-0～4-0 for accident case conditioned and 4-0～5-0 for unconditioned. The target reliability index of 4-7 for normal operation case and 3-7 for accident case are recommended for nuclear safety related concrete structures design.
Keywords:nuclear safety related concrete structure; reliability; calibration; target reliability index
作者簡介：貢金鑫，博士，教授，博士生導師；Email:jinxingong@163.com。
