- 摘 要
-
（1 中國電力科學研究院有限公司， 北京 100055； 2 中南電力設計院， 武漢 430071）
［摘要］鍛造法蘭作為新型節點連接形式，在特高壓鋼管塔所占比重較大、造價較高。通過分析目前特高壓鋼管塔鍛造法蘭的應用情況，提出了鍛造法蘭按強度級差設計的新方法。針對錫盟-勝利1 000千伏交流輸電線路鋼管塔的受力特點和鋼管庫規格，研究提出了Q345強度級差鍛造法蘭規格庫，完成了鋼管塔采用強度級差鍛造法蘭的經濟性分析。研究表明：在特高壓鋼管塔設計中采用強度級差鍛造法蘭，最大程度地降低了鍛造法蘭的比重，能夠進一步提高特高壓鋼管塔的經濟性。
［關鍵詞］特高壓交流； 鋼管塔； 鍛造法蘭； 強度級差； 經濟性
中圖分類號：TM753文獻標識碼：A文章編號：1002-848X(2018)13-0035-04
Application study on strength graded forging flange of Ximeng-Shengli UHV AC steel tubular tower
Li Qinghua1, Wu Jing1, An Ping1, Xia qian2, Wu Haiyang2
(1 China Electric Power Research Institute, Beijing 100055, China; 2 Central Southern China Electric Power Design Institute Co., Ltd., Wuhan 430071, China)
Abstract:As a new type of joint, the proportion and cost of forging flange in Ultra High Voltage(UHV) steel tubular tower are high. By analyzing the application of forging flange in UHV steel tubular towers, design method of strength graded forging flange was advanced. According to the bearing characteristic of steel tube tower and the steel tube specifications of Ximeng-Shengli 1 000kV Alternating Current(AC) transmission lines, serial specifications of Q345 strength graded forging flange were proposed and the economic analysis on strength graded forging flange used in steel tubular towers was carried out. Research shows that the application of strength graded forging flange in tower design can wholly reduce the proportion of forging flange, which can further improve the economy of UHV steel tubular tower.
Keywords:UHV AC; steel tubular tower; forging flange; strength graded; economy
作者簡介：李清華，碩士，高級工程師，Email: Lqh@epri.sgcc.com.cn。
- 下載地址
-
