- 摘 要
-
(1 深圳市建筑設計研究總院有限公司， 深圳 518031； 2 上海大學土木工程系， 上海 200072)
［摘要］針對云南省博物館新館的建筑特點，選取了合適的隔震支座，并對隔震支座進行了合理的平面布置；利用SAP2000軟件對結構進行地震響應分析，采用Bouce Wen模型模擬隔震支座；對比分析了多遇地震、設防地震及罕遇地震作用下隔震結構和非隔震結構的層間剪力、層間加速度及層間位移角。結果表明，隔震結構的動力特性優于非隔震結構，隔震結構可以有效降低地震反應。為驗證數值分析的可靠性，采用1/30縮尺比例模型進行模擬地震振動臺試驗，試驗結果表明計算分析是可靠的。
［關鍵詞］云南省博物館新館； 隔震設計； 振動臺試驗； 地震響應分析
中圖分類號：TU318+.2文獻標識碼：A文章編號：1002-848X(2016)22-0048-08
Seismic isolation design and shaking table test of New Yunnan Provincial Museum
Liao Shujiang1， He Wenfu2， Liu Wenguang2
(1 Shenzhen General Institute of Architectural Design and Research Co., Ltd., Shenzhen 518031, China;2 Department of Civil Engineering of Shanghai University, Shanghai 200072, China)
Abstract:According to the architecture characteristics of New Yunnan Provincial Museum, the appropriate isolation bearings were selected and reasonable plane layout of isolation bearing was conducted. SAP2000 software was used to conduct seismic response analysis on the structure, and Bouce Wen model was adopted to simulate isolation bearing. Contrast analyses on the interlayer shear force, interlayer acceleration and interlayer displacement angle of isolation structure and non-isolation structure were conducted respectively under frequent earthquake, fortification earthquake and rare earthquake. The results show that the dynamic characteristics of isolation structure are better than that of non-isolation structure, and isolation structure can effectively reduce the seismic response. To verify the reliability of numerical analysis, simulated earthquake shaking table test was conducted on 1/30 scale model, and the test results show that the calculation and analysis are reliable.
Keywords:New Yunnan Provincial Museum; seismic isolation design; shaking table test; seismic response analysis
*國家自然科學基金項目（51308331,51278291）。
作者簡介：廖述江，碩士，高級工程師，一級注冊結構工程師，Email:86481621@qq.com。
- 下載地址
-
