884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

（1 上海同磊土木工程技術有限公司， 上海 200092； 2 同濟大學土木工程學院， 上海 200092；3 上海建筑空間結構工程技術研究中心（籌）， 上海 200092）

［摘要］風力發電機組基礎是結構的重要組成部分，它承擔著將上部結構所承受的全部荷載可靠地傳遞到地基，并保持結構整體穩定的作用。針對在風力發電機組基礎設計過程中的主要問題，開發了風力發電機組地基基礎設計系統。通過OpenGL參數化風電機組地基基礎模型數據，以SAP2000為有限元分析內核，采用API調用的方式在SAP2000中自動完成從建模到讀取計算結果的過程；系統根據《風電機組地基基礎設計規定（試行）》（FD 003—2007）對基礎各項指標進行驗算并給出配筋結果，自動生成計算書，最后利用ObjectARX技術在AutoCAD中根據計算結果自動生成施工圖。工程實例表明，本系統能夠明顯提高風電機組地基基礎設計效率，對同類型的工程項目具有借鑒作用。

［關鍵詞］風電基礎； SAP2000； ObjectARX； OpenGL

中圖分類號：TU470+.3文獻標識碼：A文章編號：1002-848X(2016)14-0026-04

Development on foundation design system for wind power turbine based on dual-platform

Fan Gaojie1, Wu Jie2,3, Zhang Qilin2,3

(1 Shanghai Tonglei Civil Engineering Technology Co.,  Ltd.,  Shanghai 200092, China; 2 School of Civil Engineering, Tongji University, Shanghai 200092, China; 3 Shanghai Engineering Research Center of Spatial Structures, Shanghai 200092, China)

Abstract:Foundation of the wind power turbine is the important part of the structure and transfers all structural loads from superstructure to the base reliably and stabilizes the overall structure. According to the main issues in the wind power turbine foundation design process, a design system for wind turbine foundation was developed. OpenGL was used to parameterize model data of wind power turbine foundation and SAP2000 software was selected as the kernel of finite element analysis in the system. API call functions were adopted to realize the process from modeling to obtaining of calculation results automatically. According to Design regulations on subgrade and foundation for wind turbine generator system(for trial implementation) (FD 003—2007), the system checked all indices of the foundation and provided reinforcement results with calculation statements generated automatically. Finally, ObjectARX technology was used to generate construction drawings in AutoCAD based on calculation results automatically. Practical engineering projects show that the system can greatly improve design efficiency for wind power turbine foundation, and can provide useful references for the same type projects.

Keywords:wind power foundation; SAP2000; ObjectARX; OpenGL

通訊作者：吳杰，博士，副教授，Email: wj536@163.com。