- 摘 要
-
（1 上海煙草集團有限責任公司， 上海 200082； 2 上海建科預應力技術工程有限公司， 上海 200032）
［摘要］通過采用補償收縮混凝土無縫設計和施工新方法，可以實現超長混凝土結構取消后澆帶或不設縫的目的，不但可有效縮短工期，且防水性能好,是解決超長混凝土結構裂滲問題的有效技術途徑。通過混凝土坍落度試驗、限制膨脹率試驗以及抗壓強度試驗，研究了膨脹劑摻量對三種強度等級補償收縮混凝土的坍落度以及各齡期限制膨脹率和抗壓強度的影響。根據試驗結果，得出各強度等級補償收縮混凝土膨脹劑的最優摻量，優化了混凝土配合比以實現實際超長混凝土結構工程對補償收縮混凝土各方面性能的要求。
［關鍵詞］補償收縮混凝土； 膨脹劑； 坍落度； 限制膨脹率； 抗壓強度
中圖分類號：TU528-55文獻標識碼：A文章編號：1002-848X(2016)13-0103-04
Mix proportion design and experimental study on shrinkage compensating concrete
Gu Zhengyu1, Zhang Defeng2, Feng Weimin1, Yang Yichao1
(1 Shanghai Tobacco Group Co., Ltd., Shanghai 200082, China; 2 Shanghai Jianke Prestress Engineering Co., Ltd., Shanghai 200032, China)
Abstract:By using shrinkage compensating concrete in seamless design and new construction method, the post casting belts or joints can be cancelled in super-long concrete structures. This method can not only effectively shorten construction period but also obtain good effects on waterproof property. Therefore, shrinkage compensating concrete is an effective technical way to solve the problem of cracks and infiltration in super-long concrete structures. The influences of amount of expansive agent on slump, limited expansion ratio and compressive strength of shrinkage compensating concrete with three strength grades and different ages were studied through slump test, limited expansion ratio test and compressive strength test. Based on the test results, the optimal amount of expansive agent in shrinkage compensating concrete was determined for each strength grade for concrete and the mix proportion of concrete was optimized, so that the performance requirements on shrinkage compensating concrete in practical super-long concrete structures could be met.
Keywords:shrinkage compensating concrete; expansive agent; slump; limited expansion ratio; compressive strength
*上海煙草集團有限責任公司科技項目（SZBCW201500462）。
作者簡介: 顧征宇，本科，高級工程師，Email：guzy@sh.tobacco.com.cn。
- 下載地址
-
