柱承式群倉結構模型模擬地震振動臺試驗研究
王錄民1,張華1,盧文勝2,肖昭然1,張昊1,許啟鏗1
- 摘 要
-
(1 河南工業大學土木建筑學院,鄭州 450052; 2 同濟大學土木工程防災國家重點實驗室,上海 200092)[摘要]通過對立筒群倉結構1/16整體模型進行模擬地震振動臺試驗,測試了模型結構的動力特性及其在7度多遇、7度基本、7度罕遇地震作用下的加速度、位移和側壓力變化等動力反應,研究了模型結構的破壞機理和破壞模式,并根據試驗結果和相似理論,推導和分析了原型結構的地震反應。試驗及分析結果表明:立筒群倉模型整體抗震性能良好,能夠抵抗所在地區7度設防烈度下各水準地震作用。同時對薄弱部位提出了加強措施。[關鍵詞]立筒群倉; 振動臺試驗; 地震反應; 動態側壓力Study of shaking table tests on the model of group silos structuresWang Lumin1, Zhang Hua1, Lu Wensheng2, Xiao Zhaoran1, Zhang Hao1, Xu Qikeng1(1 He’nan University of Technology Civil Engineering Institute, Zhengzhou 450052, China;2 Tongji University Civil Engineering Disaster Prevention Country Key Laboratory, Shanghai 200092, China)Abstract:A shaking table test of a 1/16 scale model of the reinforced concrete group silos was carried out.The dynamic properties,lateral pressure and responses of acceleration and deformation on the different level earthquakes were measured.Its dynamic behavior,cracking pattern and failure mechanism were studied as well. According to the model test results,the seismic response of the prototype was deduced and analyzed.Both the test and analytical results show that the prototype has a better seismic behavior, and it is able to survive under different level earthquakes.Some suggestions for the design of the structure were put forward.Keywords:group silos; shaking table model test; seismic response; dynamic lateral pressure*國家自然科學基金項目(50678061),河南省科技攻關項目(0624250004)。作者簡介:王錄民,碩士,教授,Email:zhengzhouzhh@yahoo.cn。參考文獻[1] 孫芳,王命平,耿樹江,等.柱承式筒倉的地震反應分析[J]. 特種結構,2005,22(4):4-9.[2] GB50077—2003 鋼筋混凝土筒倉設計規范 [S].北京:中國計劃出版社,2003.[3] 王命平,孫芳,高立堂,等.筒承式群倉的地震作用分析及試驗研究[J]. 工業建筑,2005,35(10):30-32.[4] 王錄民,張華.鋼筋混凝土立筒群倉結構抗震模型的設計和制作[J]. 結構工程師,2008,24(3):126-128.
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!