884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

（香港華藝設計顧問(深圳)有限公司， 深圳  518031）

［摘要］基于ABAQUS軟件二次開發平臺，開發適用于彈塑性時程分析的混凝土及鋼筋材料本構。結合現行規范，根據彈塑性時程分析中混凝土壓應變及鋼筋拉應變實際數值變化，編程實現混凝土構件在經歷地震后的損壞等級自動判別，并根據判別結果按照色塊由淺至深的原則排序，賦予每根構件不同顏色，使判別構件損傷程度得到量化，并能清晰直觀地表達不同構件的損傷程度，為后續性能化設計提供更加便利、準確的可視化計算結果。通過工程算例，對本構及自動量化判別構件損壞等級的方法分別進行單根構件和常規結構兩個層面的正確性驗證。最后，通過實際工程案例，詳細分析和闡述該研究成果的具體應用，對彈塑性計算能輸出更為詳盡、量化的成果，為施工圖階段性能化設計提供充分的依據。

［關鍵詞］性能化設計； ABAQUS軟件； 二次開發； 構件損壞等級； 量化； 可視化

中圖分類號：TU313-2文獻標識碼：A文章編號：1002-848X(2017)24-0060-08

Constitutive secondary development of ABAQUS software for automatically quantifying and identifying of component damage level

Chen Long, Zhang Wei, Liu Jun, Yan Lijun

(Hong Kong Huayi Design & Consultant (Shenzhen) Co.,  Ltd.,  Shenzhen 518031， China)

Abstract:Based on the secondary development platform of ABAQUS software, the constitutive relations of concrete and steel bars for elastic-plastic time-history analysis were developed. Combined with the current codes, according to the reinforced concrete compressive strain and tensile strain numerical changes in elastic-plastic time-history analysis, programs were compiled to automatically identify damage level of concrete components after the earthquake. The judgment results were sequenced in accordance with the principle of color from light to deep, and different colors were endowed to each component to quantify the damage degree of components. It can clearly express the damage degree of different components to provide  more convenient and accurate visualization calculation results for subsequent performance design. Through engineering examples, the correctness of constitutive and automatic quantitative identification of damage grade of component was verified by two levels of single component and conventional structure respectively. Finally, through the actual project case, specific application of the research results was analyzed in detail, to output the more detailed and quantitative results for elasto-plastic calculation and provide sufficient basis for performance-based design construction drawing stage.

Keywords:performance design; ABAQUS software; secondary development; component damage level; quantification; visualization

作者簡介：陳龍，本科，工程師，Email:421090988@qq.com。