- 摘 要
-
（1 中國建筑西北設計研究院有限公司， 西安 710018；2 西安建筑科技大學土木工程學院， 西安 710055）
［摘要］傳統風格建筑結構中關鍵節點的性能對結構性能的影響至關重要，分別進行了2組節點試驗，區分考慮斗拱構件對節點性能的影響，且每組試驗有2個試件，軸壓比分別為0-3和0-6。試驗結果表明：未考慮斗拱作用節點（ZL1系列）的破壞主要集中于上下柱交接焊縫區域，而考慮斗拱作用節點（YL1系列）的破壞主要集中于上下柱櫨斗處和節點短柱區域，且櫨斗部位破壞較早，變形較大；ZL1系列試件相比YL1系列試件節點承載力低，剛度與強度退化慢；在此基礎上給出工程設計建議和加強構造措施。
［關鍵詞］傳統風格建筑； 關鍵節點； 斗拱構件； 構造措施
中圖分類號：TU318文獻標識碼：A文章編號：1002-848X(2017)22-0089-05
Design and test of key joints in traditional style building
Wu Kun1, Che Shunli1, Xue Jianyang2, Jia Junming1, Ge Hongpeng1
(1 China Northwest Architecture Design and Research Institute Co., Ltd., Xi′an 710018， China; 2 School of Civil Engineering, Xi′an University of Architecture and Technology, Xi′an 710055, China)
Abstract:The performance of key joints in the traditional building structure has an important influence on the performance of the whole structure. Therefore, two series of tests were conducted to discriminatively consider the influence of brackets component on performance of joint, and each series of tests have two specimens with axial compression ratio 0.3 and 0.6 respectively. The experimental results show that without considering the effect of node brackets (ZL1 series) damage mainly concentrated in cap block at the upper and lower column or short column node region, and considering the effect of node brackets (YL1 series) damage mainly concentrated in the upper and lower column and short column node region, and brackets parts damage early, deformation is large. Compared with YL1 series, the joint bearing capacity of ZL1 series is relatively lower, the brightness and strength degrade more slowly. Based on the mentioned above, some key joint strengthening methods and design recommendations were given during a construction procedure.
Keywords:traditional style building; key joint; bracket component; construction measure
*中建股份科技研發課題（CSCEC-2012-Z-16）。
作者簡介：吳琨，本科，教授級高級工程師，一級注冊結構工程師，Email：895889693@qq.com。
- 下載地址
-
