884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

(1 華東建筑設計研究院有限公司， 上海 200011； 2 同濟大學建筑工程系， 上海 200092；3 中船第九設計研究院工程有限公司， 上海 200063)

［摘要］設計制作了圓形ETFE氣枕模型，進行氣枕粘塑性成形試驗，得到氣枕膜面高度與內壓的實時變化曲線。基于Perzyna的粘塑性本構方程，對ETFE薄膜進行單向拉伸試驗，得到材料拉伸曲線及屈服強度，通過MATLAB擬合得到Perzyna本構方程參數，利用有限元軟件進行了數值分析，并與試驗結果進行比較。結果表明：ETFE氣枕粘塑性成形過程試驗結果與數值分析結果吻合良好，運用Perzyna粘塑性本構方程以及非線性材料模型可以準確、有效地完成ETFE粘塑性成形過程分析。

［關鍵詞］ETFE氣枕； 粘塑性； 有限元分析

中圖分類號：TU398-7文獻標識碼：A文章編號：1002-848X(2017)12-0064-04

Viscoplastic forming analysis of ETFE circular cushion

Wu Yanzhen1， Wu Ming′er2， Li Yintang3， Cui Jiachun1

(1 East China Architectural Design & Research Institute Co.，  Ltd.，  Shanghai 200011, China; 

2 Department of Building Engineering, Tongji University, Shanghai 200092, China; 3 China Ship Design & Research Institute Engineering Co.，  Ltd.，  Shanghai 200063, China)

Abstract:ETFE circular cushion model was designed and the viscoplastic forming tests were carried out, the changing real\|time data curve of  pressure and height of air pillow were obtained. Based on the Perzyna model, uniaxial tensile tests were carried out on ETFE film while the  material tensile curve and yield strength were obtained, thus constants of Perzyna simplified viscoplastic model were obtained by MATLAB. Simulation analysis of this cushion was carried out by using finite elements software. Comparing finite element calculation results to testing results, it′s found that the test results and the numerical results are in good agreement in the ETFE cushion viscoplastic forming process, the analysis of  ETFE cushion viscoplastic forming process can accurately and effectively complete by using of Perzyna viscoplastic constitutive equation.

Keywords:ETFE cushion； viscoplastic； finite element analysis

作者簡介：巫燕貞，碩士，工程師，Email:yanzhen_wu@arcplus.com.cn。