884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

(中國建筑第八工程局有限公司工程研究院， 上海 200122)

［摘要］對3D打印建筑材料層間粘結性能進行了測試，包括3個3D打印試件的粘結抗拉強度試驗和3個3D打印試件的粘結剪切強度試驗。著重分析了3D打印建筑材料層間粘結的破壞模式、破壞過程與破壞形態。分析結果表明，3D打印建筑材料存在層間粘結薄弱層，破壞時均發生在粘結層部位，其軸心抗拉強度為0-74N/mm2；剪切強度測試時未發生剪切破壞，得到試件破壞時的彎曲抗拉強度平均值為0-88N/mm2。

［關鍵詞］3D打印建筑材料； 層間粘結性能； 抗拉強度； 彎曲強度； 剪切強度

中圖分類號：TU399文獻標識碼：A文章編號：1002-848X(2017)04-0049-04

Experimental study on interlayer bonding property of 3D print building material

Ge Jie, Ma Rongquan, Miao Dongmei, Bai Jie

(Engineering Research Institute of China Construction Eighth Engineering Division  Co.,  Ltd.,  Shanghai 200122, China)

Abstract:Interlayer bonding property of 3D print building material was tested, including 3 bonding tensile strength tests on 3D print specimens and 3 bonding shear strength tests on 3D print specimens. The failure modes, processes and forms of interlayer bonding property of 3D print building materials were emphatically analyzed. Analysis results indicate that there are interlayer bonding weak layers in the 3D print building materials, and specimen failure occurs in the bonding layer part with average axial tensile strength of 0-74N/mm2. The shear failure does not occur in shear strength test and average bending tensile strength of 3D print building materials is 0-88N/mm2 when specimen is failed.

Keywords:3D print building material; interlayer bonding property; tensile strength; bending strength; shear strength

*中國工程院咨詢研究項目（2015-XY-17）。

作者簡介：葛杰，博士，高級工程師，一級注冊結構工程師，Email: gj3258899@126.com。