884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

(1 同濟大學土木工程學院，上海 200092； 2 同濟大學建筑設計研究院，上海 200092； 3 華東建筑設計研究院有限公司，上海 200002)

［摘要］浦東國際機場T2航站樓結構Y形柱-梁連接鑄鋼節點中采用了以向心關節軸承作為轉動核心的球鉸節點形式，實現了空間理想鉸接的結構要求。該節點由向心關節軸承、銷軸、鑄鋼件等部分組成，構造復雜，無法用常規方法確定其承載力。對該鑄鋼球鉸節點進行了足尺試驗，著重考察了向心關節軸承的傳力性能和轉動性能；在試驗基礎上進行了有限元分析，得出了向心關節軸承節點的破壞機理，并提出了節點構造改進措施。

［關鍵詞］向心關節軸承；球鉸節點；節點試驗

Experimental study on radial spherical plain bearing joint connecting Y-column and beam in Shanghai Pudong International Airport Terminal 2

Chen Yiyi¹, Zhao Xianzhong¹, Ma Yue^1,2, Wang Shuai^1,3, Zhou Jian²(1 College of Civil Engineering,Tongji University,Shanghai 200092,China; 2 Architecture Design & Research Institute of Tongji University,Shanghai 200092,China; 3 East China Architectural Design & Research Institute Co.,Ltd.,Shanghai 200002,China)

Abstract:A new type of articulated cast steel joint with radial spherical plain bearing (RSPB) was adopted to connect the Y-column and beam in Shanghai Pudong International Airport Terminal 2 to obtain three dimensional rotation and load transfer. This joint is composed of a RSPB, a pin shaft and steel castings, which is too complicated to be analyzed by traditional methods. The full-scale joint was tested to investigate the rotation and load capacity. Based on both FEA and experimental results, the failure mechanism of the RSPB joint is obtained and the joint details are improved.

Keywords:radial spherical plain bearing; articulated joint; joint experiment

作者簡介：陳以一，教授，博士生導師，Email:yiyichen@#edu.cn。

參考文獻

［1］汪大綏，周健，劉晴云，等. 浦東國際機場T2航站樓鋼屋蓋設計研究［J］. 建筑結構，2007，37(5):45-49.

［2］DAVID DUERR. Pinned connection strength and behavior［J］. Journal of Structural Engineering, 2006(132)：182-194.

［3］徐進永，閻樹嶺. 工程機械鉸接銷軸結構設計［J］. 建筑機械，1997(5)：18-19，37.

［4］馬越. 上海浦東機場二期工程航站樓鋼屋蓋鑄鋼節點性能研究［D］. 上海：同濟大學，2006.