- 摘 要
-
(山東省建筑科學研究院, 濟南 250031)
[摘要]基于數值模擬技術針對圓柱形消化池常見的五種工況進行了受力分析,并對計算結果進行了對比。研究結果表明,施加預應力后,池壁整個截面在各種工況下皆處于環向受壓狀態,可以保證結構防滲防漏的設計要求;并且通過五種工況的對比分析還可得,靜水壓力及壁面溫差是結構設計中的控制荷載。所得結論可為相關設計人員提供參考。
[關鍵詞]消化池; 圓柱形; 預應力; 數值模擬
中圖分類號: TU279 文獻標識碼: A文章編號: 1002-848X(2016)S1-0702-05
Numerical analysis of cylindrical digester with multi-loading case
Liu Chuanqing, Li Shoucai, Zheng Yan, Sun Kaike, Chu Shihong
(Shandong Provincial Academy of Building Research, Jinan 250031, China)
Abstract: Numerical analysis was carried out, based on the numerical simulation technology for cylindrical digester with five kinds of load cases, and the calculated results were compared. The research results were shown that after prestressing force was applied, the vertical side wall of cylindrical digester was in the condition of fully compression, which was to ensure the structure of anti-seepage and leak-proof requirement. And through the comparative analysis results of five kinds load cases, temperature and hydrostatic were the controlled loads in the phase of structural designing phase. The conclusion can be a reference for related design workers.
Keywords: digester; cylindrical; prestressing force; numerical analysis
作者簡介: 劉傳卿,博士,高級工程師,Email: 2008liuchuanqing@163.com。